Camera "A" and Camera "B"
The Camera "A" and Camera "B" are subminiature cameras made by Okada around 1950.
Contents
Context
It is said that the Camera "A" and Camera "B" were made after a request by the US military.[1] Their designer was Ishiwata Shigeo (石渡茂雄), who previously developed the Kolt, a straightforward Hit-type subminiature, and the unconventional pistol-shaped Gemmy.[1] The Camera "A" was designed for 8mm film and the Camera "B" for 16mm film. It is said that a stereo camera for 16mm film was planned and perhaps made as well.[1]
Documents
No original document showing either camera has been observed so far. Mention of at least three actual examples is known, all having a number associated to the name. It seems that this number is part of the model name and is not a serial number, but this is yet unclear. The Camera "A" No.1 is mentioned here at Submin.com and here at Subclub.org, perhaps after some unspecified pictorial source. The Camera "B" No.2 is pictured in Sugiyama, where it is said to belong to the collection of M. Auer. The Camera "A" No.3 is featured in an article by Yazawa in Camera Collectors' News.
The Camera "A"
The Camera "A" No.3 takes unperforated 8mm film, loaded in a double cassette. The frame size is about 7×8mm and the exposure counter goes one graduation past 30.[2] The camera's overall dimensions are 45.5×25×22mm when the finder is retracted, and 45.5×25×34mm when it is deployed, and the weight is a mere 70g.[3]
The body is made of solid brass and has the shape of a stadium track, when viewed from above.[4] Rectangular front and rear plates are screwed to the main body by six screws each. The camera name CAMERA "A" NO.3 is engraved on the front plate, above the lens hole. The finder's frame retracts into the front plate, and the rear bead slides into a compartment protruding from the rear plate. There are two diamond-patterned discs on the camera's top, turned by the thumb. The left one selects the shutter speeds among B, 25, 50, 100. The right one is the exposure counter, which must be reset manually. The bottom plate slides out to load the film, and has inscriptions all around: an OKAKO TOKYO logo, the company name OKADA OPT. INDST. CO., LTD., the mention PATENTS···PENDING, and the name NO.3 CAMERA "A".
No conventional shutter release is visible, and it seems that the camera can be triggered only by a soft release screwed into a post protruding at the right end of the body. The two-bladed shutter is probably self-cocking. The lens is placed behind the shutter blades, and is not externally visible. Its focus and aperture are fixed, and its features are unclear — Yazawa suggests a 15mm f/4.5.[5]
From the few mentions of the Camera "A" No.1, it seems that this earlier model was very similar.[6] One source mentions an aluminium body but this might be a mistake.[7]
The Camera "B" No.2
The Camera "B" No.2 takes 11×15mm exposures on 16mm film.[8] It is similar in shape to the Camera "A", but somewhat larger. The frame finder is replaced by a tubular finder at the top. The speed selecting disc on the left is similar to that of the smaller model, and gives B, 25–200 settings. The exposure counter disc is buried inside the top cover, under a circular plate attached by three screws, and only a portion is visible through a crescent-shaped window. The central part again has a diamond pattern for manual reset.
The camera name CAMERA "B" NO.2 is engraved at the top of the front plate. There is a sliding lever above the lens, certainly used to cock the shutter. The camera again has no conventional shutter release but a thread for a cable release at the right end of the body. The lens is a B-Kolex Anastigmat 22mm f/3.5 with fixed focus and aperture. It is placed in front of the shutter blades, and its barrel protrudes out of the front plate, unlike on the Camera "A". The only surviving example observed so far has lens no.105.[9]
Notes
- ↑ 1.0 1.1 1.2 Yazawa, p.11 of Camera Collectors' News no.233.
- ↑ Frame size: Yazawa, p.11 of Camera Collectors' News no.233, precisely measured 6.7×7.7mm.
- ↑ Dimensions and weight measured by Yazawa, p.12 of Camera Collectors' News no.233.
- ↑ Made of solid brass: Yazawa, p.12 of Camera Collectors' News no.233.
- ↑ Yazawa, p.12 of Camera Collectors' News no.233.
- ↑ Mention here at Submin.com and here at Subclub.org.
- ↑ Aluminium body: this page at Submin.com.
- ↑ Sugiyama, item 5019.
- ↑ Example pictured in Sugiyama, item 5019.
Bibliography
- Sugiyama, Kōichi (杉山浩一); Naoi, Hiroaki (直井浩明); Bullock, John R. The Collector's Guide to Japanese Cameras. 国産カメラ図鑑 (Kokusan kamera zukan). Tokyo: Asahi Sonorama, 1985. ISBN 4-257-03187-5. Item 5019.
- Yazawa Seiichirō (矢沢征一郎). "Renzu no hanashi (143) Kamera 'A'" (レンズの話[143]カメラ'A', Lens story [143] Camera 'A'). In Camera Collectors' News no.233 (November 1996). Nishinomiya: Camera Collectors News-sha. Pp.11–5.
The Camera "A" and Camera "B" are not listed in Kokusan kamera no rekishi.
Links
In English:
- Camera "A" No.1 and Camera "B" No.2 at Submin.com
- Brief mention of the Camera "A" No.1 and Camera "B" No.2 at Subclub.org