Kodak lenses

From Camera-wiki.org
(Redirected from Bimat)
Jump to: navigation, search

Note: this article covers Kodak lenses primarily from the mid-1930s through the 1960s.

scans made by Mario Groleau (Image rights)

In the later part of the 19th century and beginning of the 20th century, Kodak cameras typically came with either simple meniscus lenses, dual meniscus lenses (periscopic type), achromatic meniscus lenses, or better lenses from third parties such as Bausch & Lomb's Rapid Rectilinear.


Eastman Kodak began selling Bausch & Lomb f6.3 Tessar lenses in Optimo shutters on Autographic cameras in 1914, in the UK and European market these were labelled as Kodak Anastigmats and the Optimo shutter renamed Velosto, they were also sold as Zeiss Kodak Anastigmats. Some Zeiss Kodak anastigmats appear on cameras made between 1909-13 such as the No. 1A Speed Kodak. Kodak sourced lenses from a number of manufatcturers an there were some Taylor, Taylor, Hobson Ltd Cooke Kodak Anastigmat lenses as well.

A smaller group of lenses of Dialyte design were also labelled as Kodak anasigmats, these were similar to the Goerz(Berlin) Celor which Kodak had used on some cameras prior to WWI. These 4 element Dialyte lenses introduced in 1914 had an aperture of f/8, the following year, the Series II lenses were introduced with apertures of f/7.7 and focal lengths of 170mm and 203mm. These lenses were in production until the late 1940's when they were coated and renamed as Ektars, the Kodak Ektar f/7.7 203mm remained in production into the 1960.

The majority of early Kodak Anastignmat lenses were of Tessar design and after WWII were coated and renamed as Ektars. However Kodak used the termm anastigmat and later Ektar to cover a number of different lens designs from plasmats, wide angle and telephoto lenses.

Kodak lenses were made in the US, UK and Germany.

The names Eastman Kodak used for their lenses had little correlation the lenses' configuration or aperture. Instead, the name used was a marketing device indicating the relative quality of the optic.

By the 1930s, all Kodak lenses, other than those of small (f/stop = f/8 or less) aperture, were anastigmats. Kodak lenses were made not only for still cameras but also for enlargers, slide projectors, and for Cine-Kodaks and Kodascopes. Lenses for camera purposes are described here from the standpoint of general groups. Until the mid 1930s, even Kodak's best lenses were simply called Kodak Anastigmats. Beginning about 1935, with the advent of practical color photography, Kodak began classify lenses into tiered categories, though some existing lens lines (i.e. the professional large format Kodak Anastigmat f/4.5 lenses) retained their original naming conventions. The first category introduced was the Kodak Ektars. These in particular represented an optical improvement over the usual anastigmat.

Keeping in mind that Kodak produced a staggering number and variety of lenses, and that these naming categories were phased in over time, the following categories are not without exceptions:

Category mid-1930s 1940s 1950s
Pro quality lenses Anastigmat Ektar Ektar Ektar
High Quality lenses Anastigmat Special Anastar Ektanar
Quality lenses Anastigmat Anaston Ektanon
Entry level lenses Diway, Bimat, Twindar, Kodar Kodet, Kodar Kodet, Kodar

Kodak Ektars

According to Kodak, there had been a growing demand, especially from those doing precision photographic work of a specialized nature, for lenses which met the most exacting requirements. In line with its policy of catering to discriminating photographers, the Eastman Kodak Company announced the first of a new series of high-quality lenses. These lenses were originally designated as Kodak Anastigmat Ektars, later as simply Kodak Ektars.

They were anastigmats, but were made to higher standards than the term anastigmat ordinarily implied. The Kodak Ektars were not, in general, intended to replace, but rather to supplement the established professional Kodak Anastigmat Lenses, which were manufactured to precise standards and which were designed to give excellent results adequate for most photographic work, both black-and-white and color.

In producing Kodak Ektar Lenses, the lens designers brought to their task the experience of years in designing lenses of quality for all photographic purposes, and they took advantage of new and improved types of optical glass. Many different models were made and tested. As a result, the Kodak Ektars represented all that skill, care, and optical research could produce. In manufacture, every step is carefully controlled, and in many cases, special tools and testing methods were devised. The lens mountings have likewise received the attention they deserve. Such meticulous care in workmanship was a guarantee that full value had been built into these lenses.

Ektar lenses made after 1945 were coated and marked after the serial number with an L - for "Lumenized".

According to Kodak, the performance characteristics of all Kodak Ektar Lenses were:

1. A Kodak Ektar Lens was of outstanding excellence and of preeminent quality.

2. The degree of all residual aberrations in Kodak Ektars was negligible. For example, astigmatism, which is normally present in small amounts in all lenses, had been reduced to a new low.

3. Kodak Ektar Lenses were carefully corrected for lateral chromatic aberration, which was particularly important when Kodachrome transparencies made with these lenses were to be reproduced photomechanically or by other color printing processes.

4. An Ektar lens is focused as a complete unit.

5. In black-and-white photography, the quality of Kodak Ektar Lenses is most evident when fine- grain negative materials are used or when a small portion of a negative is to be considerably enlarged. The Kodak Ektars were also suited to making negatives from which photomural enlargements are to be made.

6. Relative aperture (diaphragm) markings were accurate within extremely close limits.

In all, the Ektars had a reputation for very high quality and consistency, comparable to the best European manufacturers. The use of the Ektar lens brand name appears to have been strictly limited to Kodak's best lenses. Perhaps the last generally available Ektars were the 26mm f/2.7 units on the top of the line 110 Instamatic cameras.

Some notable examples:

Kodak Ektar f/2.0, 45 mm., A 6-element Gauss type lens, was supplied with the Kodak Bantam Special, was extremely well corrected and was suitable for Kodachrome as well as black-and-white photography. Its high speed and wide angle of view made it an excellent all-purpose lens for night photography indoors as well as daylight outdoor photography. Introduced in 1936, this was one of the earliest uses of the Ektar brand by Kodak.

A similar f/2.0, 47mm. Ektar was used on the American Kardon, a Leica clone originally ordered by the US Signal Corps. This lens can also be found on the Retina II camera, though this is an uncommon variant.

Kodak Ektar f/3.5, 50 mm., A 4-element Tessar type lens, was supplied on the Kodak Retina I, is another highly corrected lens which gave superb results in Kodachrome or black-and-white. These lenses are sometimes confused with the Schneider Xenars which were rebranded for the USA market as Anastigmat Ektars and Ektars. The easiest way to identify a genuine Kodak lens on a Retina is by the serial number.

Kodak Ektar f/3.5, 44 mm., This 4-element Tessar type lens was supplied on the Kodak Signet 35, and was described by Anne Ruder in Modern Photography magazine as "comparable to lenses in the most expensive 35mm cameras". Kodak advertisements of the time claimed this lens was superior to the German lenses on their own Retinas. From the 1953 version of Kodak Data Book - Lens, Shutters and Portra Lenses, "This four-element completely Lumenized Ektar lens, especially designed for the Kodak Signet 35 Camera is one of the finest lenses ever produced for a miniature camera, regardless of price. Black-and-white negatives are crisp and needle-sharp, capable of being enlarged many diameters without loss of detail. Kodachrome transparencies have greater color purity and saturation than ever before. Focusing is consistently accurate throughout the entire focusing range from 2 feet to infinity. The lens mount is supported by 50 ball bearings, working smoothly and accurately at all seasonal temperatures."

Kodak Ektar f/3.7, 107 mm. and f/4.5, 101 mm., f/4.7, 127mm and f/4.5, 152mm, 7½in., and 12in., These 4-element Tessar type lenses, were supplied for 2¼×3¼-inch cameras such as the Speed Graphic of this size. The f/3.7, 107 mm. was of particular interest to photographers using 2¼×3¼-inch Kodachrome Professional Film. Supplied in a Compur-Rapid shutter, it was equally suitable for black-and-white photography especially under adverse light conditions or where short exposures are necessary. The f/4.5, 101mm was more commonly seen mounted in a Kodak Supermatic shutter.

Of note is that the 127mm f/4.7 lens was produced in a front element focusing mount for the Combat Graphic 4x5 camera. In accordance with Kodak's naming conventions, this lens was branded as an Anastigmat Special rather than an Ektar.

Kodak Ektar f/3.5 100mm, and f/3.7 105mm, both 5-element Heliar type lenses result of Fred Altman's 10 Heliar variant prototypes of 1942[1] - The 100mm was used on the Kodak Medalist and Medalist II cameras, while the 105mm was supplied in shutter for 2¼×3¼-inch press type cameras.
Kodak Ektar f/3.5 78mm, a 4-element lens used on the Chevron camera.

Kodak Ektar f/7.7, 203mm/8inch - This lens can be found marked as 203mm or 8". A 4 element, 4 group Dialyte type lens, it was primarily intended for 5×7 studio and view cameras. A highly corrected lens at all focusing distances, even wide open, this lens is still prized by large format photographers. In North america the lens is mounted in a Supermatic shutter, in Britain and Europe in an Epsilon, Prontor or Compur #0 shutter. Some late production US 203mm f7.7 Ektars are mounted in a Graphic Synchro Compur #1.

Eastman Ektar f/6.3, 8½-inch, 10-inch, 12-inch, and 14-inch, all 4-element Tessar type lenses, were designed especially for commercial color photography with 8×10 and 5×7 studio and view cameras. This lens is corrected to a very high degree and is especially well corrected for transverse chromatic aberration or lateral color; it is therefore ideally suited to Kodachrome and black- and-white photography. Each lens was tested for exact register of the images of the three primary colors. The lens was set up so that the light from the test object passes through the lens obliquely. The rectangles were made of colored gelatin, each passing a narrow band of the spectrum. If the lens had been properly made and assembled, the narrow black lines through the rectangles on the test object would be continuous in the test exposure. A test negative was made for each of these lenses, and kept on file. These lenses were marketed in later years as Commercial Ektars.

Kodak Wide-Field Ektar f/6.3, 80mm., 100mm., 135mm, 190mm, and 250mm. - These 4-element gauss types were wide angle professional lenses for the 2¼×3¼, 3¼×4¼, 4×5, 5×7, and 8×10 inch formats.

Kodak Aero Ektars - These were high speed 6-element Gauss types, typically used for aerial survey and reconnaissance cameras. The most common encountered are the F/2.5, 7-inch and 12-inch lenses, the 7-inch covering a 5×5 inch negative.

Kodak Color Printing Ektar /4.5, 2in., 63mm, 3in., 87mm, 93mm, 96mm, 100mm, 103mm, 113mm, 125mm, 127mm, etc. These 5-element Heliar type lenses, were used in Kodak photofinishing equipment. This type of lens was produced in an amazing plethora of similar focal lengths, including 63, 87, 93, 96, 100, 103, 113, 125, 127, and others. These lenses were at times marketed as Kodak Enlarging Ektars.
Kodak Projection Ektars - These lenses were usually 4-element Tessar types available in an astounding variety of focal lengths. Later known as Kodak Enlarging Ektars. After 1947, the term Projection Ektar was applied only to lenses for still and motion-picture projectors, and not to enlarger lenses as it has been in the past. Example: Kodak Projection Ektar f/2.8 2 1/3 inch, see lens collection

Kodak Anastigmat f/4.5 Lenses for commercial, portrait, and press work were available in a variety of focal lengths from 5 1/2 to 12 inches. They were supplied in barrels or shutters for mounting on interchangeable lens boards for use on appropriate cameras including view, studio, and press cameras of the Speed Graphic and Graflex types. They were highly corrected anastigmats and their excellence was attested by the popularity they long enjoyed among leading photographers. Although these lenses ought to have been re-labeled as Ektars, they retained their original appellations throughout their production runs due to their established reputation in the professional community.

Kodak Anastigmat Specials / Anastars / Ektanars

Kodak Anastigmat Specials were made in a variety of focal lengths and in relative apertures of f/3.5 and f/4.5. They were made according to the most reliable optical formulas and the newest types of optical glass. They are usually mounted in front-element-focusing lens mounts (which tends to reduce close focusing performance), and in some cases, this is the only real difference between an Anastigmat Special and an Ektar. In the late 1940s, current Anastigmat Specials were rebranded as Anastars. In the 1950s, Kodak labeled lenses of this class as Ektanars. Some Ektanons and Ektanars, notably those on the Signet 40 and Signet 80, were unit-focusing lenses. Kodak also made Projection Ektanars for 35mm slide projectors. In recent years, the Ektanar label had been widely used on consumer 35mm, APS, and digital cameras.

Some notable examples:

Kodak Anastar f /3.5, 51 mm. A 4-element Tessar type lens, was used on the Kodak 35. Earlier branded as an Anastigmat Special.

Kodak Anastigmat Special, f /4.5, 47mm. A 4-element Tessar type lens, was used on the Kodak Bantam)

Kodak Anastigmat Special f /4.5, 100 mm. and 127 mm. These 4-element Tessar type lenses were used on the Kodak Specials and Monitors Six-20 and Six-16). Later branded as an Anastar on the Kodak Tourist.

Kodak Kodak Anastar 44mm., f/3.5. This 4-element Tessar type lens was used on the Kodak Pony IV. Might this be a front-element focusing version of the Signet 35's Ektar?

Kodak Ektanar 50mm., f/2.8. This 4-element Tessar type lens was used on the Kodak Signet 80. The f/2.8 aperture, high for a Tessar type lens, was made possible by the use of optical glass containing thorium oxide. Unlike most lens of the Anastigmat Special/Anastar/Ektanar line, this lens uses unit focusing.

Kodak Projection Ektanar 5 inch f/2.8 (see lens collection)

Kodak Anastigmats / Anastons / Ektanons

Often confused with the 1930's professional lenses of the same name, the Kodak Anastigmats were manufactured in a variety of focal lengths, and in relative apertures from f /3.5 to f/4.5. These lenses and the Kodak Anastigmat Specials permitted the taking of pictures under unfavorable light conditions or at the faster shutter speeds required by moving subjects. These Kodak Anastigmats, like others having high relative apertures, required focusing. They are mounted in front-element-focusing mounts except the Kodak Anastigmat as used on the 3A Kodak, the Kodak Recomars, and the f/3.5 lenses on the Kodak Duo Six-20s, which are focused by moving the entire lens and shutter assembly along the camera-lens axis. In the late 1940s, current Anastigmats were rebranded as Anastons. In the 1950s, Kodak labeled lenses of this class as Ektanons. The Ektanon on the Signet 40 is an another exception to the front element focusing rule, being a unit-focusing lens. Kodak also made Projection/Enlarging Ektanons for copying and enlarging work, and also for 35mm slide projectors.

Some notable examples:

Kodak Anastigmat f /4.5, 51 mm. A 3-element Cooke triplet type, was used on less expensive models of the Kodak 35. Later branded as an Anaston.

Kodak Anastigmat f /5.6, 50 mm. A 3-element Cooke triplet type was also used on Kodak Bantam and Kodak 35

Kodak Anastigmat f /3.5,75 mm. A 3-element Cooke triplet type was used on the Kodak Duo Six-20

Kodak Anastigmat f/4.5, 103 mm., 105mm., and 126 mm. These 3-element Cooke triplet lenses were used on folding Kodak Six-20, Tourist, and Six-16 cameras. Later lenses were labeled as Anastons.

Kodak Anastigmat f /6.3, 102 mm., 105mm., and 128 mm. These 3-element Cooke triplet types were also used on folding Kodaks Six-20, Vigilant 620, and Six- 16 cameras. Later lenses were labeled as Anastons.

Kodak Enlarging Ektanon f/4.5, 2in., 3in., 4 in,. and f/6.3, 89mm. - These are 3-element Cooke triplet type lenses typically used on amateur enlarging equipment. The 89mm lens was standard on the Kodak Hobbyist Enlarger.

Kodak Enlarging Ektanon f/4.5, 5⅜in., 6⅜in., 7½in., and 10in. These 4 element Tessar design lenses were used on large format enlargers where relatively small enlargements were needed. A 4 element Dialyte design was marketed as the Kodak Enlarging Ektanon f/8, 10 inch.

Achromatic Lenses

Another more economical group of lenses, which includes the Kodak Kodar, Twindar, and Bimat Lenses, utilize the front element method of focusing for subjects as close as five feet from the lens. These lenses and shutters, within their limitations, will produce decent pictures. Cameras so equipped have the advantages of lightness of weight, simplicity of operation, and were inexpensive.

It should be noted that in the 1920s and early 1930s, the Kodar was usually triplet design of decent performance. In later years it was often a doublet design of lesser quality. This name has been used for various lenses until the present time.

The Bimat and Twindar lenses, designed in 1933 by Donald L. Wood[2], were a modification of the common unsymmetrical periscopic doublet. The front element was split by a plane surface, the front half then being used for focusing. This design was significantly cheaper to produce than a Cooke type triplet as not only were the planar surfaces very easy to produce, but also, like the periscopic lens, the elements were all of low cost "white glass" (rather than the more expensive crown and flint glasses used in most triplets.) This design allowed for economical front element focusing, overcoming the major shortcoming of simpler lenses, i.e. fixed focus. They were often a lower cost alternative to Kodak Anastigmats on folding roll film cameras.

Kodak Kodar f/7.9, 98mm, 111mm, 131mm, 156mm et al - A 3 element triplet design produced for Kodak's mid-level cameras, in a Kodak No. 0 shutter. In this case, unit focusing was provided by the camera's adjustable bellows.

Kodak Bimat, f/11, focal lenth unmarked (app.103mm) - A 3 element triplet design with front element focusing produced for Kodak's entry level adjustable cameras, in a Kodak Kodex shutter.

Kodak Kodar, f/8, 72mm - A 3 element triplet design with front element focusing produced for Kodak's "up level" version of the Duaflex III. The shutter is a simple single speed unit with a time setting.

Simple Lenses

Lenses for Simple Cameras were designed for beginners in photography or for those who want cameras that do not require focusing or shutter or lens adjustments. Such cameras must necessarily be equipped with lenses of comparatively small relative aperture, and hence a single shutter speed. Lenses in this group are the Kodak Single Meniscus and Doublet Lenses, and the Kodet, a single meniscus type lens. The Kodak Diway was a single fixed element lens having a second element (or closeup diopter) that could swing in front of the main lens for close focusing.

In the 1950's, Kodak began making simple lenses from acrylic plastics. These were often labeled Dakon (a recycled brand name formerly used on simple shutters). Performance of these early plastic lenses left much to be desired, but they helped keep camera costs down.

Kodak Kodet, f/15, 75mm (unmarked) - Glass lenses don't get much cheaper than this - designed for those who didn't care to learn how to use a camera. These single element, fixed focus lenses lacked any sort of diaphragm control and were an alternative to multiple element adjustable lenses on the Tourist, Duaflex and numerous other Kodak cameras.


  1. A Short History of the Heliar Lenses
  2. United States Patent 1954340


Original documents

  • Brian Coe, Kodak Cameras - The First Hundred Years, Hove Foto Books, 1988
  • Kodak Data Book - Kodak Lenses Shutters And Portra Lenses, 3rd Edition (1948)
  • Kodak Data Book - Kodak Lenses Shutters And Portra Lenses, 4th Edition (1952)
  • Kodak Data Book - Enlarging With Kodak Materials And Equipment, 1st Edition (1954)
  • Kodak Data Book - Camera Technique For Professional Photographers, 1st edition, (1953 printing)