Difference between revisions of "Industar-22"
(added note about rigid lens on RF camera with adapter ring) |
|||
Line 28: | Line 28: | ||
{{br}} | {{br}} | ||
− | A rigid model was made for the [[Zenit 1]] [[SLR]]. This also has a 39 mm screw mount, but is substantially shorter than the collapsible model because the body of the [[Zenit 1 |Zenit]] is deeper than the rangefinder cameras, to accommodate its mirror. With a short | + | A rigid model was made for the [[Zenit 1]] [[SLR]]. This also has a 39 mm screw mount, but is substantially shorter than the collapsible model because the body of the [[Zenit 1 |Zenit]] is deeper than the rangefinder cameras, to accommodate its mirror. With a short extension tube this lens (or its successor the rigid [[Industar-50 |I-50]]) could be used on rangefinder cameras, and was supplied together with the tube, with some Zorki and [[MIR |Mir]]. |
{{Flickr_image | {{Flickr_image |
Revision as of 17:52, 1 March 2011
The Industar-22 is a lens of standard length produced for a number of 35 mm cameras made by KMZ in the Soviet Union from 1948 into the 1950s. It is a 5 cm f/3.5 Tessar-formula lens. It was first made as a collapsible lens in Leica 39 mm screw-mount, for the Fed and Zorki rangefinders, which resembles Leica's collapsible Elmar.
I-22 mounted on a FED 2 image by mflenses (Image rights) |
I-22 collapsed on a FED 2 image by mflenses (Image rights) |
I-22 collapsed and extended image by Voxphoto (Image rights) |
A rigid model was made for the Zenit 1 SLR. This also has a 39 mm screw mount, but is substantially shorter than the collapsible model because the body of the Zenit is deeper than the rangefinder cameras, to accommodate its mirror. With a short extension tube this lens (or its successor the rigid I-50) could be used on rangefinder cameras, and was supplied together with the tube, with some Zorki and Mir.
Rigid I-22 for Zenit 1 image by Dustin McAmera (Image rights) |
Both collapsible and rigid models can accept 36 mm slip-on or clamp-on hoods and filters (Leica's 'A36' fitting). The rigid lens also has an M33 x 0.5 filter thread. In the late 50's the I-22 was succeeded by the I-50, a recalculation of the same design, described as of higher quality.[1]
Notes
- ↑ In Russian: Industar 22 at ZenitCamera.com