Difference between revisions of "Industar-22"
m (Replaced dead ref with archived version) |
Hanskerensky (talk | contribs) m (Changed rights image /vox/5239583193/ from wp to nc after checking flickr image) |
||
Line 23: | Line 23: | ||
|image_text= I-22 collapsed and extended | |image_text= I-22 collapsed and extended | ||
|image_by= Voxphoto | |image_by= Voxphoto | ||
− | |image_rights= | + | |image_rights= non-commercial |
}} | }} | ||
<br style="clear:both;"/> | <br style="clear:both;"/> |
Revision as of 06:35, 18 December 2013
The Industar-22 is a lens of standard length produced for a number of 35 mm cameras made by KMZ in the Soviet Union from 1948 into the 1950s. It is a 5 cm f/3.5 Tessar-formula lens. It was first made as a collapsible lens in Leica 39 mm screw-mount, for the Fed and Zorki rangefinders, which resembles Leica's collapsible Elmar.
I-22 mounted on a FED 2 image by mflenses (Image rights) |
I-22 collapsed on a FED 2 image by mflenses (Image rights) |
I-22 collapsed and extended image by Voxphoto (Image rights) |
A rigid model was made for the Zenit 1 SLR. This also has a 39 mm screw mount, but is substantially shorter than the collapsible model because the body of the Zenit is deeper than the rangefinder cameras, to accommodate its mirror. With a short extension tube this lens (or its successor the rigid I-50) could be used on rangefinder cameras, and was supplied together with the tube, with some Zorki and Mir cameras.
Rigid I-22 for Zenit 1 image by Dustin McAmera (Image rights) |
Both collapsible and rigid models can accept 36 mm slip-on or clamp-on hoods and filters (Leica's 'A36' fitting). The rigid lens also has an M33 x 0.5 filter thread. In the late 50's the I-22 was succeeded by the I-50, a recalculation of the same design, described as of higher quality.[1]
Notes
- ↑ In Russian: Industar 22 page formerly at the KMZ archive website (http://www.zenitcamera.com) and archived at the Internet Archive 'Wayback Machine' in December 2008.