Difference between revisions of "Yashica MF-3"
(removed problem photo not added to CW pool; moved up, enlarged photo now in CW pool) |
|||
Line 32: | Line 32: | ||
* [http://www.butkus.org/chinon/yashica/yashica_mf-3/yashica_mf-3.htm Yashica MF-3 Super manual] on [http://www.butkus.org/chinon/ Mike Butkus' site] | * [http://www.butkus.org/chinon/yashica/yashica_mf-3/yashica_mf-3.htm Yashica MF-3 Super manual] on [http://www.butkus.org/chinon/ Mike Butkus' site] | ||
− | [[Category: Yashica]] | + | [[Category: Yashica|MF-3]] |
[[Category: M|MF-3]] | [[Category: M|MF-3]] | ||
[[Category: Brazil]] | [[Category: Brazil]] |
Revision as of 03:53, 29 November 2012
Yashica MF-3 image by Daniele Muscetta (Image rights) |
Introduced in the market in 1985, the MF-3 was the first Yashica camera produced exclusively in Brazil where 1.2 million units were manufactured.
It has versions in the colors black, yellow and red.
The MF-3 is a viewfinder camera for 35mm film. It has a fixed-focus 38mm f3.5lens intended for subjects from 1.5m away to infinity.
It has manual exposure in its non-flash mode. Users select an aperture with the "weather symbol ring" on the lens barrel. The CdS meter cell above the lens inside the filter thread will trigger a warning light in a low light situation indicating the flash should be used.
Two AA batteries power the meter and the flash.
Specifications
- Lens: 38mm, f/3.5, 3 elements in 3 groups
- Aperture: f/4-f/22
- Shutter: Mechanical with a fixed speed of 1/125
- Film Speed Settings: 100, 200, 400, and 1000 ASA.
- Flash: GN 12 (ASA/ISO 100)