Difference between revisions of "Solida Record"

From Camera-wiki.org
Jump to: navigation, search
m (Replaced 'you')
(Added link to user manual page)
 
(One intermediate revision by the same user not shown)
Line 16: Line 16:
 
4x4cm or 6x6cm exposures can be selected with a switch at the front, which moves a little frame in front of the viewfinder (this is not linked to any mask in the film chamber). It has a neat loading system with 2 half-cylinders which rotate to the outside that hold the film.
 
4x4cm or 6x6cm exposures can be selected with a switch at the front, which moves a little frame in front of the viewfinder (this is not linked to any mask in the film chamber). It has a neat loading system with 2 half-cylinders which rotate to the outside that hold the film.
  
 +
==Links==
 +
*[https://www.butkus.org/chinon/solida/solida_6x6_i_ii.htm Solida Record user manual] at [https://www.butkus.org/chinon/ Butkus.org]
  
 
[[Category:Franka]]
 
[[Category:Franka]]
 
[[Category:S]]
 
[[Category:S]]
 +
[[Category:German 6x6 folding]]

Latest revision as of 06:08, 5 May 2021

A very simple and light folder camera, post-war built by Franka, "Made in West Germany, US Zone". It's made of thin metal and plastic and uses 120 film.

It features a 2-speed shutter (B and 1/30) and an aperture choice with 3 settings, divided in rain (f/8), cloudy (f/11) and sunny (f/16). There is a flash connector and a cold shoe to mount it. The lens is a simple 80mm f/8 "Spezial Objectiv" which focuses with symbols. Cocking the shutter is done by the film wind knob.

4x4cm or 6x6cm exposures can be selected with a switch at the front, which moves a little frame in front of the viewfinder (this is not linked to any mask in the film chamber). It has a neat loading system with 2 half-cylinders which rotate to the outside that hold the film.

Links