Fujica GW690

The Fujica GW690 Professional and the nine similar models that followed it are leaf-shutter fixed-lens rangefinder cameras for 120/220 film that Fuji brought out as successors to its interchangeable-lens Fujica GL690 and GM670 Professional models.

In addition to the Fujica GW690 Professional and Fujica GSW690 Professional (the last to be called "Fujica"), the series includes the Fuji GW690II, GW670II, GSW690II, GW690III, GW680III, GW670III, GSW690III and GSW680III (all of them "Professional"); the entire series is treated within this article.

Features (such as interchangeable film backs) normal among medium-format cameras of the time, and others (such as exposure meters) almost universal among cameras in general are missing in the GW690 and its successors, which look rather as if a black Leica M3 with a particularly large lens (perhaps 85mm f/1.8) had been made to a much larger scale.

Fixed lens, and reliability

The immediate predecessors of these large rangefinder cameras had interchangeable lenses, and to those who like to think of them as "Texas Leicas", the change to a fixed lens may seem perverse. But people close to the development of the camera have explained that the main reason was that sales of lenses of focal lengths other than 65mm and 100mm were very low. Moreover, eliminating the lens mount would further reduce weight and increase reliability.

The emphasis on reliability was determined by the unusual market for the cameras. As noted in the article on the G690 and the other interchangeable-lens models, the major use of these cameras was in the thriving if unglamorous business of photographing tour groups. Buses would disgorge their passengers at such places as the 1970 Osaka Expo, group photographs would be taken, and the prints could be ready later the same day. Mr Nakanishi (仲西史則), in charge of this work in one company, has recalled that one camera might go through 50 or 100 rolls of film per day (perhaps short rolls, designed for six 6×6 frames), and over thirty thousand exposures per year.

GW690 and GSW690

Fujica GW690 Professional image by Dirk HR Spennemann (Image rights)

The Fujica GW690 Professional was the first to be released, in November 1978, priced at ¥143,500. It is based on the GL690 — a leaf-shutter rangefinder camera for 6×9 exposures on 120 or 220 film — from which it differs most importantly in having a fixed lens.

The lens is an EBC Fujinon, 90mm f/3.5, with five elements in five groups (67mm filter thread). Reputedly it is sharper at large apertures than the 100mm lenses of the earlier cameras, but out-of-focus areas are not so pleasant.

The right and (to a lesser extent) the left sides of the front of the camera are convex, forming the kind of grips that soon become very common on other cameras (and that often contain batteries) but were unusual at the time. A switch on the top and next to the accessory shoe selects among short-roll 120 (four exposures) and regular 120 (eight) and 220 (sixteen); there is no longer provision for sheet film. The dimensions are 189(W)×119(H)×123(D)mm; it weighs 1430g, a saving of 300g from the GL690, mostly attributable to the lack of lens breechlock, curtain, and associated switchgear.

The Seiko #0 shutter lacks a B setting and instead only has T. The shutter seems curiously noisy for a leaf shutter; but in fact the noise is produced not by the shutter but instead by a device at the bottom of the camera that counts multiples of ten shots — up to 999, and then, like a car odometer, restarting at 000 — and is intended to remind the owner when shutter servicing is needed. Different people have different numbers for recommended servicing; Chatani says that the shutter was to have been guaranteed for 10,000 exposures. What is certain is that this "odometer" can easily be tampered with (just like that of a car) or disconnected for quietness.

The rangefinder spot is round rather than rectangular. Instead of "mushroom" strap lugs, there are two loops for a strap on the left side of the camera (the side under the photographer's left hand).

The Fujica GSW690 Professional is a wider-angle version of the GW690. The lens is an EBC Fujinon SW 65mm f/5.6, with six elements in four groups (67mm filter thread). This lens is widely thought to be optically identical to the 65mm f/5.6 lens available for the G690 series. It weighs 1475g. It was released in March 1980, for ¥163,500.

GW670II, GW690II and GSW690II

Fuji GW670II image by Pay No Mind (Image rights)

Released in June 1985, the Fuji GW690II Professional and Fuji GSW690II Professional are minor revisions to the GW690 and GSW690. The accessory shoe is now a hotshoe, the shutter release has a lock, the grip is checked rather than ribbed, and the strap lugs are conventionally one to each side, rather than both on one side. The logo and name "Fuji" (rather than "Fujica") now appear on the front of the camera. Released in December 1985, the Fuji GW670II Professional was Fuji's follow-up to the Fujica GM 670 Professional as 6×7 camera. It differs from the GW690II only in having a smaller film gate and different gearing and numbering for the film advance mechanism.

The GW690II and GSW690II are ten and five grams heavier respectively than their predecessors.

The cameras were priced at ¥158,500 (GW690II), ¥163,500 (GW670II) and ¥178,500 (GSW690II).

GW670III/GW680III/GW690III and GSW680III/GSW690III

Fuji GW690III
image by Zokyo Labs (Image rights)

image by Camera Historian (Image rights)

The Fuji GW690III Professional, Fuji GSW690III Professional,, Fuji GW680III Professional, Fuji GSW680III Professional and Fuji GW670III Professional have redesigned exteriors that emphasize curves rather than right angles and have rubberized coatings. They also have a small spirit level embedded in the top in front of the wind lever (this level has a single axis, serving only to help balance the left and right), and push-button spool release. The GSW690III/GSW680III/GSW670III lens is a Biogon-type SW65mm F5.6 with 6 elements in 4 groups mounted in a mechanical #0 shutter. Often Biogon-designs have 8 lenses, however Fujifilm used high index glass and increased the lens thickness and curve radius to obtain a novel 6 element design. The difference between the 6x9, 6x8 and 6x7 models is only a smaller film gate and different gearing and numbering for the film advance mechanism: the dimensions and weights are otherwise the same, and in Japan the prices were the same too.

Despite allegations in web forums, etc., of how these new cameras are "plasticky" compared with their 1985 predecessors, the GW690III, GSW690III and GW670III weigh 20, 30, and 15 grams more than their respective predecessors. The Fujifilm designers actually wanted to reduce weight as much as possible by using plastics, however to keep the rangefinder accuracy and lens alignment precision, the body frame is made from by die cast JIS AD12 aluminum alloy. Furthermore the designers emphasized the ability to mold plastics to give a better grip and protection for the user when in extremely cold temperatures, such as mountaineering. Both due to moldability and cost the exterior uses ABS plastics

The viewfinder has 0.45X magnification, parallax correction and a field of view of 93% at 1m and 90% at infinity. The rangefinder baseline length is 59mm.

The two 6×9 models were released in Japan in February 1992, at ¥179,000 (GW) and ¥197,000 (GSW). The 6×7 model was released in March 1992, for export only. Perhaps for the Japanese market only, the 6×8 versions vere released in March (GW) and November 1992 (GSW) respectively.

Further reading / references

In English

• The Japanese Historical Camera. 日本の歴史的カメラ (Nihon no rekishiteki kamera). 2nd ed. Tokyo: JCII Camera Museum, 2004. p.184. The G690, included for its "odometer".

In Japanese

• Koyasu Yoshinobu (子安栄信). "Fuji Shashin Firumu no kamera no subete" (富士写真フィルムのカメラのすべて All the cameras of Fuji Photo Film). Kamera Rebyū: Kurashikku Kamera Senka (カメラレビュー クラシックカメラ専科) / Camera Review: All about Historical Cameras no.44, December 1997. ISBN 4-257-13013-X. Tokushū: Fuji Shashin Firumu no kamera (特集：富士写真フィルムのカメラ, special issue on the cameras of Fuji Photo Film). Koyasu deals with these cameras on pp.69–72.
• Nawa Hidetaka (那和秀峻). Meiki o tazunete: Sengo kokusan-kamera hiwa (名機を訪ねて：戦後国産カメラ秘話) / Revisiting renowned cameras. Tokyo: Nippon-kamera-sha, 2003. ISBN 4-8179-0011-3 Nawa devotes pp.255–71 to the G690 and its successors.

External links

In English:

• Fujifilm GW690 II Pro, GSW690 II Pro, GW670 II Pro user manual at Butkus.org
• Fuji 645 RF Price & Information Guide
• Fuji 6x7 and 6x9 RF Price & Information Guide
• Evolutionary History of Fuji 6×7, 6×8 and 6×9 Rangefinders, by Dante Stella
• Fujica G690 and its successors; formerly at Robert Monaghan's Medium Format Photography website, medfmt.8k.com; now archived at the Internet Archive. The page, mostly archived bulletin-board discussions, at first appears to be about the G690 and its immediate successors, but in fact much of it is about the later, fixed-lens cameras.
• 6x9 Rangefinders at arukucamera.net (archived)

In French:

• Illustrated history of the G690 and successors, by Babar de St Cyr
• Medium format rangefinders by Daniel Herlent, scroll down for pictures of the GW670II, GSW680III and GW690III
• Fuji GW670 III on www.collection-appareils.com by Sylvain Halgand

In Japanese:

• Fujica G690BL and GM670 at Minokan Film Camera Research Room
• GW690 at Field Cameraman Note