Revere Eye-Matic EE 127
|image by Casual Camera Collector (Image rights)|
The substantial rugged camera body is made of die-cast aluminum with a white or cream baked enamel. This finish also covers the top housing in some versions, while others have a brushed-metal top which matches the camera base.
It has a single fixed shutter speed and the aperture is controlled either by the selenium cell, the aperture lever, or the focusing ring (in 'Flash-matic' mode). The 'Flash-matic' guide number automatic flash exposure system is engaged by aligning two red dots on the focusing ring and then setting the flash guide number using the aperture lever beneath the lens. This couples the aperture to the focus position to automatically set flash exposure based on the distance.
It has a coupled rangefinder, bright frame view finder and the selected aperture is displayed in the viewfinder (in all modes). It uses a single-stroke advance lever and frame counter instead of the more traditional knob/red window. Strap lugs are located on the sides of the camera; a tripod socket is located on the bottom of the camera, though no arrangement is made for a cable release.
The lens is a 58mm f/2.8 Wollensak Raptar (4 element Tessar formula) that stops down to f/22 with flash synchronization. ASA range is 10 to 100. An unusual low inertia 2 bladed aperture mechanism is used to allow automatic control by the selenium cell.
The camera was touted in ads of the time as producing 'Professional Quality Pictures'. Ruggedly constructed, these cameras can be found to this day in good operating condition. It listed for an astonishing $139.50 in 1959. (Over USD $1,000 in 2009!)
|Metal-finish top; with original box|
image by Inspiredphotos (Image rights)