Difference between revisions of "Zenit E"

From Camera-wiki.org
Jump to: navigation, search
m (analog computer -> analog exposure calculator)
m (links)
Line 9: Line 9:
 
It lacked a greater variety of shutter speeds.  There were no focusing aids apart from the plain ground-glass focus screen. The lens had to be stopped-down manually before taking a shot - there was a ring at the end of the lens to do this, and then opened again for composing the next one. The [[Zenit EM]] was an upgraded version, with an automatic diaphragm.
 
It lacked a greater variety of shutter speeds.  There were no focusing aids apart from the plain ground-glass focus screen. The lens had to be stopped-down manually before taking a shot - there was a ring at the end of the lens to do this, and then opened again for composing the next one. The [[Zenit EM]] was an upgraded version, with an automatic diaphragm.
  
It had a [[selenium meter]]. The meter's photo cell was placed above the lens mount behind a protecting window, and its instrument was placed beside a two-slice analog exposure calculator. A ring in the meter was coupled to that calculator on which the film speed had to be preselected, and when the meter's needle matched the ring the calculator showed the correct shutter-speed/aperture combinations. The [[Zenit B]] was similar to the E, but without the meter.
+
It had a [[selenium meter]]. The meter's photo cell was placed above the lens mount behind a protecting window, and its instrument was placed beside a two-slice analog exposure calculator. A ring in the meter was coupled to that calculator on which the [[film speed]] had to be preselected, and when the meter's needle matched the ring the calculator showed the correct shutter-speed/aperture combinations. The [[Zenit B]] was similar to the E, but without the meter.
  
 
<!-- This picture not there: {{Flickr_image
 
<!-- This picture not there: {{Flickr_image
Line 29: Line 29:
 
*Type: [[SLR]] body
 
*Type: [[SLR]] body
 
*Manufacturer: [[KMZ]]
 
*Manufacturer: [[KMZ]]
*Film: [[35mm]], with speeds 16 to 500 ASA
+
*Film: [[35mm]], with speeds 16 to 500 [[ASA]]
 
*Lens mount: [[M42|M42 screw mount]] without aperture release shifter
 
*Lens mount: [[M42|M42 screw mount]] without aperture release shifter
 
*Shutter: [[focal plane shutter|focal plane textile shutter]], speeds 1/30 up to 1/500 sec. + B, switchable to [[flash sync]]hro-mode (1/30s)
 
*Shutter: [[focal plane shutter|focal plane textile shutter]], speeds 1/30 up to 1/500 sec. + B, switchable to [[flash sync]]hro-mode (1/30s)

Revision as of 03:32, 3 May 2008

The Zenit E was a Russian-built SLR camera body for M42 screw lenses, made from 1965-1968[1]. The Zenit range was quite popular since it was priced moderately and it was offered under several other trademarks or brands (Kalimar, Revueflex, Prinzflex, Photokina, Spiraflex).

It lacked a greater variety of shutter speeds. There were no focusing aids apart from the plain ground-glass focus screen. The lens had to be stopped-down manually before taking a shot - there was a ring at the end of the lens to do this, and then opened again for composing the next one. The Zenit EM was an upgraded version, with an automatic diaphragm.

It had a selenium meter. The meter's photo cell was placed above the lens mount behind a protecting window, and its instrument was placed beside a two-slice analog exposure calculator. A ring in the meter was coupled to that calculator on which the film speed had to be preselected, and when the meter's needle matched the ring the calculator showed the correct shutter-speed/aperture combinations. The Zenit B was similar to the E, but without the meter.


Here the data of the Version "Prinzflex 500E"

Sources

Links