Super Solinette
|
| Agfa Super Solinette image by Raúl Sá Dantas (Image rights) |
The Super Solinette is a folding 35mm camera made by Agfa in the mid-1950s (1953-58). It is a continuation of the Solinette line, where "Super" designates a model including a coupled rangefinder. The Agfa Super Solinette was also sold in the US as the Ansco Super Regent
This folding camera is similar in the design to the larger Isolette 120 film cameras. With a pleasing symmetrical design and circular knobs for film advance and rewind.
Super Solinettes came in several combinations of lenses and shutters, most use the top of the line 50mm/3.5 Solinar (4 elements in 3 groups) but some are reported to have Apotar lenses. The diaphragm iris has 10 blades, providing an almost circular shape which produces very pleasing out of focus area.
Early models used a Synchro-Compur shutter with Speeds from 1/500-1s and B, self timer and X and M flash sync and had Solinette in the front plate markings, in these cameras the f/stops are stepless. Later models used a Synchro-Compur LVS shutter, which implemented a EV system and shutter speed and f/numbers move together, and had Super Solinette marked in the front plate.
Unfolding is performed by pressing a button on the left side, opposed to the top on the Solinette. Once unfolded, the lens bed is quite rigid, as it is locked in place by 2 struts. The camera can be set on tables or other surfaces for long exposures.
Like her sister Solinette the focusing is done by moving the whole front unit; by rotating a serrated dial at the base of the shutter/lens assembly, in the super Solinette, a coupled rangefinder helps with focusing from 1m (3.5ft) to infinity. Shutter must be cocked by hand, and a double exposure prevention system allows to make only 1 shot per frame.
|
|
Notes:
- Bellows is usually made of leather; pay attention to it as it tears in the corners.
- Also the bellows can get pinched in the edge during folding and can tear at the camera side
- Focusing unit might be stiff, due to the grease in the helicoid hardening (Agfa grease problem).
- It takes patience, solvent and lots q-tips to loosen it.
- Rangefinder adjustment is possible and requires lifting the top cover; which is achieved by loosening both rewind and advance dials.
- The double-shot prevention is very finicky, and has many small parts, don't force it or it can be ruined.
