Difference between revisions of "Stop down"
(stop down metering) |
(small fixes) |
||
Line 1: | Line 1: | ||
{{glossary}} | {{glossary}} | ||
− | To '''stop down''' a lens is to reduce the [[aperture]], | + | To '''stop down''' a lens is to reduce the [[aperture]] diameter, i.e. increase the [[f-stop | f-number]] — reducing the amount of light passing into the camera through the lens. |
This is done: | This is done: | ||
− | * to reduce the [[exposure]] (or compensate | + | * to reduce the [[exposure]] (or to compensate when changing to a slower shutter speed, keeping the exposure constant), |
* to increase the [[depth-of-field]], or, | * to increase the [[depth-of-field]], or, | ||
− | * in an [[SLR]] camera, to switch from the aperture fully open (for viewing/focusing) to the taking aperture (for depth-of-field preview, "stop-down [[light meter|metering]]", or taking the photo). On early SLRs, the lens had to be manually stopped down; later cameras coupled the [[diaphragm]] to the shutter release to stop down automatically. | + | * in an [[SLR]] camera, to switch from the aperture fully open (for viewing/focusing) to the taking aperture (for depth-of-field preview, "stop-down [[light meter|metering]]", or taking the photo). On early SLRs, the lens had to be manually stopped down; later cameras coupled the [[diaphragm]] to the shutter release to stop down automatically — the meaning of "Auto" in the context of older lenses. |
===Stop-Down Metering=== | ===Stop-Down Metering=== | ||
Stop-down metering is a technique used in [[TTL]] systems where light measurements are made through the lens, set at the taking aperture. This was used on all early SLR TTL systems; the alternative - metering with the lens fully open requires the metering system to "know" the taking aperture and compensate for it when determining the shutter speed. Full-aperture (or open-aperture) metering requires a coupling mechanism to communicate the taking aperture from the lens to the metering system (or, if set by the camera, to "tell" the lens which aperture to use); this coupling (and so full-aperture metering) was not generally available on SLRs until the 1970s. Many cameras with open-aperture metering still feature a stop-down metering mode - to allow for lenses or accessories without coupling. | Stop-down metering is a technique used in [[TTL]] systems where light measurements are made through the lens, set at the taking aperture. This was used on all early SLR TTL systems; the alternative - metering with the lens fully open requires the metering system to "know" the taking aperture and compensate for it when determining the shutter speed. Full-aperture (or open-aperture) metering requires a coupling mechanism to communicate the taking aperture from the lens to the metering system (or, if set by the camera, to "tell" the lens which aperture to use); this coupling (and so full-aperture metering) was not generally available on SLRs until the 1970s. Many cameras with open-aperture metering still feature a stop-down metering mode - to allow for lenses or accessories without coupling. |
Revision as of 14:51, 29 May 2021
To stop down a lens is to reduce the aperture diameter, i.e. increase the f-number — reducing the amount of light passing into the camera through the lens.
This is done:
- to reduce the exposure (or to compensate when changing to a slower shutter speed, keeping the exposure constant),
- to increase the depth-of-field, or,
- in an SLR camera, to switch from the aperture fully open (for viewing/focusing) to the taking aperture (for depth-of-field preview, "stop-down metering", or taking the photo). On early SLRs, the lens had to be manually stopped down; later cameras coupled the diaphragm to the shutter release to stop down automatically — the meaning of "Auto" in the context of older lenses.
Stop-Down Metering
Stop-down metering is a technique used in TTL systems where light measurements are made through the lens, set at the taking aperture. This was used on all early SLR TTL systems; the alternative - metering with the lens fully open requires the metering system to "know" the taking aperture and compensate for it when determining the shutter speed. Full-aperture (or open-aperture) metering requires a coupling mechanism to communicate the taking aperture from the lens to the metering system (or, if set by the camera, to "tell" the lens which aperture to use); this coupling (and so full-aperture metering) was not generally available on SLRs until the 1970s. Many cameras with open-aperture metering still feature a stop-down metering mode - to allow for lenses or accessories without coupling.