Difference between revisions of "Ricoh Auto TLS EE"
(noting this is final Ricoh m42 SLR model; crosslinks) |
m ("bayonet") |
||
| Line 12: | Line 12: | ||
Because the M42 mount was not designed with a linkage to tell the body what the [[Lens#Lens Speed|lens speed]] is, this must be set manually using a dial surrounding the rewind crank. When lenses other than the Rikenon-EE type are mounted, the indicated f-stop must be transferred to the lens's aperture ring by the user. Stopdown metering is also possible, by matching the needle to an index mark in the viewfinder, with the lens at its working aperture (e.g. by pressing the depth-of-field preview lever). | Because the M42 mount was not designed with a linkage to tell the body what the [[Lens#Lens Speed|lens speed]] is, this must be set manually using a dial surrounding the rewind crank. When lenses other than the Rikenon-EE type are mounted, the indicated f-stop must be transferred to the lens's aperture ring by the user. Stopdown metering is also possible, by matching the needle to an index mark in the viewfinder, with the lens at its working aperture (e.g. by pressing the depth-of-field preview lever). | ||
| − | This was Ricoh's final SLR to use the [[42mm screw lenses|42mm screw mount]]; the company would switch to the [[K mount lenses|Pentax K mount]] with the 1977 [[Ricoh XR-1|XR-1]] and [[Ricoh XR-2|XR-2]]. | + | This was Ricoh's final SLR to use the [[42mm screw lenses|42mm screw mount]]; the company would switch to the bayonet [[K mount lenses|Pentax K mount]] with the 1977 [[Ricoh XR-1|XR-1]] and [[Ricoh XR-2|XR-2]]. |
The [[CdS]] metering circuit measuring through the lens is powered by one PX675 1.35v [[mercury battery]]. The horizontally-traveling focal plane shutter offers a range from 1/1000 sec. through 1 sec. plus B, with [[flash sync]] at 1/60th sec. | The [[CdS]] metering circuit measuring through the lens is powered by one PX675 1.35v [[mercury battery]]. The horizontally-traveling focal plane shutter offers a range from 1/1000 sec. through 1 sec. plus B, with [[flash sync]] at 1/60th sec. | ||
Revision as of 18:06, 29 September 2011
|
| image by Just Plain Curt (Image rights) |
The Auto TLS EE is an SLR for 35mm film, introduced in 1976[1] by Ricoh. While it accepts any 42mm screw-mount lens, when used with proprietary Rikenon lenses set to "EE"[2] it offers shutter-priority autoexposure: The body is able to set the correct lens f-stop automatically in response to the brightness of the scene, with a viewfinder needle indicating the chosen aperture.
Because the M42 mount was not designed with a linkage to tell the body what the lens speed is, this must be set manually using a dial surrounding the rewind crank. When lenses other than the Rikenon-EE type are mounted, the indicated f-stop must be transferred to the lens's aperture ring by the user. Stopdown metering is also possible, by matching the needle to an index mark in the viewfinder, with the lens at its working aperture (e.g. by pressing the depth-of-field preview lever).
This was Ricoh's final SLR to use the 42mm screw mount; the company would switch to the bayonet Pentax K mount with the 1977 XR-1 and XR-2.
The CdS metering circuit measuring through the lens is powered by one PX675 1.35v mercury battery. The horizontally-traveling focal plane shutter offers a range from 1/1000 sec. through 1 sec. plus B, with flash sync at 1/60th sec.
Notes
- ↑ The date 1976 for the introduction comes from the Ricoh Japan page linked below.
- ↑ In addition to the standard 50mm f/1.7 lens, this table (scanned at OrphanCameras.com) shows four additional focal lengths from 28mm to 200mm were offered.
Links
- Ricoh Auto TLS EE online manual from Mike Butkus' OrphanCameras.com
In Japanese
