Difference between revisions of "Kowa SETR & R2"
Hanskerensky (talk | contribs) (→Links: Re-installed and Repaired Link URL's) |
m (Added info - removed stub notation.) |
||
Line 1: | Line 1: | ||
− | |||
{{Flickr_image | {{Flickr_image | ||
|image_source= http://www.flickr.com/photos/altamiranopics/5571583774/in/pool-camerawiki | |image_source= http://www.flickr.com/photos/altamiranopics/5571583774/in/pool-camerawiki | ||
Line 18: | Line 17: | ||
{{br}} | {{br}} | ||
− | The final, 1970 version of [[Kowa]]'s SE series of 35mm [[SLR]]s, offering interchangeable lenses but using a complex behind-the-lens leaf shutter arrangement. | + | {{br}} |
+ | The final, 1970 version of [[Kowa]]'s SE series of 35mm [[SLR]]s, offering open aperture metering and interchangeable lenses, but using a complex behind-the-lens leaf shutter arrangement. The SET-R2 replaced the 1968 SET-R. The differences between the models were minimal: the SET-R2 gained a black plastic advance lever cap, a film reminder at the base of the rewind crank, and an all black f/1.8 50mm standard lens in place of the old chrome edged f/1.9. | ||
+ | |||
+ | Lenses available included an f/2.8 35mm, f/3.5 100mm, f/4 135mm, and f/4 200mm. | ||
+ | |||
+ | The shutter is a Seiko SLV with speeds of 1 - 1/500, plus B and a self-timer. | ||
+ | |||
+ | The TTL meter has a film speed range of 10 - 800 ASA, and employs a viewfinder centre-the-needle control, with both the shutter speed and aperture settings being coupled. | ||
+ | |||
+ | The viewscreen combines matte Fresnel screen and condenser. with a micro-prism centre spot. | ||
+ | |||
+ | There is a single flash terminal and an M/X selection switch. The x-sync speed is 1/30. | ||
==Links== | ==Links== |
Revision as of 21:59, 7 May 2019
Kowa SET R2 (1970) image by Aldo Rafael Altamirano (Image rights) |
No focal-plane shutter image by Aldo Rafael Altamirano (Image rights) |
The final, 1970 version of Kowa's SE series of 35mm SLRs, offering open aperture metering and interchangeable lenses, but using a complex behind-the-lens leaf shutter arrangement. The SET-R2 replaced the 1968 SET-R. The differences between the models were minimal: the SET-R2 gained a black plastic advance lever cap, a film reminder at the base of the rewind crank, and an all black f/1.8 50mm standard lens in place of the old chrome edged f/1.9.
Lenses available included an f/2.8 35mm, f/3.5 100mm, f/4 135mm, and f/4 200mm.
The shutter is a Seiko SLV with speeds of 1 - 1/500, plus B and a self-timer.
The TTL meter has a film speed range of 10 - 800 ASA, and employs a viewfinder centre-the-needle control, with both the shutter speed and aperture settings being coupled.
The viewscreen combines matte Fresnel screen and condenser. with a micro-prism centre spot.
There is a single flash terminal and an M/X selection switch. The x-sync speed is 1/30.