Clack

From Camera-wiki.org
Revision as of 09:15, 17 October 2006 by Driesvandenelzen1 (talk | contribs) (transforming remarks into an article)
Jump to: navigation, search

The Clack camera was manufactured by Agfa 1954-65. Earlier models had a metal body. Later ones were made of plastic. It is a simple, box like camera. It had a single element 95mm meniscus lens with built in close up filter and yellow filter. It takes 6×9 cm pictures on 120 Roll Film.

Intelligent solutions

To enable this camera to take quality pictures with such a simple lens, it is allways stopped down to f/11 ot further. The large negative size allows contact prints of an acceptable size. When enlarged, they need not be enlarged by great factors. Best feature of all is the curved film plane. There's no pressure plate in the back of the camera, the film isn't supposed to be flattened. As is visible in the pictures, the camera body is oval shaped. The film is led around the curved back of the camera to create maximum sharpness. An intelligent solution to create a low cost decent quality camera.


More data:

  • Aperture f/11 and f/12.5
  • Shutter about 1/30 plus B
  • Built in yellow filter

Zone focusing with two steps:

  • 1-3m (3-10 feet) with a built-in close up lens.
  • 3m (10 feet)-infinity with just an aperture ring between the lens and the film


A useable camera

The Clack is a light viewfinder camera, originally designed for 50 speed B&W film. Most negatives were contact printed. The Agfa Clackworks great with 50 speed slide films like Velvia, so use it while you can still get that film. Black and White 50 speed films, and overexposing 100 speed color negative by one stop ought to be fine.


130189349_2927cb17c1.jpg

130189350_ecd571b793_m.jpg

Links