Difference between revisions of "Butcher's Maxim"
m (ty;po) |
m |
||
Line 7: | Line 7: | ||
}} | }} | ||
The '''Maxim'''s were a range of basic [[box camera]]s made in England by [[Butcher|W. Butcher & Sons Ltd.]] between c.1903 and 1920<ref>{{McKeown}}, p.172</ref>. There were four sizes, No.1 for 6x6cm images, No.2 for 6x9, No.3 for 6.5x11 and No.4 for 8x11. The no.1 and 2 use "2¼ Ensign spool or No.2 Brownie" - now called [[120 film]]. | The '''Maxim'''s were a range of basic [[box camera]]s made in England by [[Butcher|W. Butcher & Sons Ltd.]] between c.1903 and 1920<ref>{{McKeown}}, p.172</ref>. There were four sizes, No.1 for 6x6cm images, No.2 for 6x9, No.3 for 6.5x11 and No.4 for 8x11. The no.1 and 2 use "2¼ Ensign spool or No.2 Brownie" - now called [[120 film]]. | ||
+ | |||
+ | A slider selects between three apertures, whilst the shutter has an instantaneous (I)/Time (T) selector. | ||
Construction is mostly of wood, with a sheet metal side to the film carrier. The camera opens side-wise for loading; the film carrier slides out after pressing two catches, top and bottom, simultaneously. There is a hinged pressure plate mounted on the carrier which is pressed onto the film when the carrier is replaced. | Construction is mostly of wood, with a sheet metal side to the film carrier. The camera opens side-wise for loading; the film carrier slides out after pressing two catches, top and bottom, simultaneously. There is a hinged pressure plate mounted on the carrier which is pressed onto the film when the carrier is replaced. |
Revision as of 00:48, 27 December 2009
This article is a stub. You can help Camera-wiki.org by expanding it.
Maxim No.2 Photo by AWCam |
The Maxims were a range of basic box cameras made in England by W. Butcher & Sons Ltd. between c.1903 and 1920[1]. There were four sizes, No.1 for 6x6cm images, No.2 for 6x9, No.3 for 6.5x11 and No.4 for 8x11. The no.1 and 2 use "2¼ Ensign spool or No.2 Brownie" - now called 120 film.
A slider selects between three apertures, whilst the shutter has an instantaneous (I)/Time (T) selector.
Construction is mostly of wood, with a sheet metal side to the film carrier. The camera opens side-wise for loading; the film carrier slides out after pressing two catches, top and bottom, simultaneously. There is a hinged pressure plate mounted on the carrier which is pressed onto the film when the carrier is replaced.
open for loading Photo by AWCam |