Difference between revisions of "Balda Juwella"
(CW pic showing alternate shutter faceplate)
m (Rogue apostrophe)
|Line 8:||Line 8:|
The Juwella was a folding camera made by [[Balda]] in the
The Juwella was a folding camera made by [[Balda]] in the . It is a [[folder]] exposing 6×9 cm images on [] roll film.
Revision as of 11:33, 13 March 2012
|image by Siim Vahur (Image rights)|
The fixed lens is an anastigmat 10.5 cm (105 mm) marketed as Juwella. It has a maximum aperture of f6.3 of f4.5. It has shutter speeds 1/100", 1/50", 1/25", and the settings T and B. The main framing device is a double window to adjust for parallax error. The Juwella also has a viewfinder mounted to the lens and shutter mechanism. The body of the camera is a monkey box of sorts. It has no hot shoe for a flash but has a spring-loaded keyhole for the insertion and lock of accessory objects (which are presumably no longer made...). The tripod-mount of the Juwella is of the type (5/8") used for larger cameras. Some Juwellas have slightly different setups (such as film masks, shutters etc...) and variations were produced for different manufacturers 1.
Opening the Camera
The opening and closing of the film compartment is quite confusing for the first time user... There is a very small latch on the side of the keyhole and strap. There is an even smaller arrow indicating the direction to pull it. The back of the camera will now be unlocked. The place for the insertion of fresh 120 film readily folds out for quick insertion. The place for the take-up spool does not do the same. The trick is to pull up on the wind-up key; similar to modern 35mm cameras.
Revealing the Bellows
To open the bellows of Juwella, you must first find a small button to the front-left of the two-frame viewfinder. After you push it, the door of the bellows will be released and can be opened until it snaps into place with the help of the folding door lever.
|Alternate Juwella faceplate design|
image by Sten Oja (Image rights)