Difference between revisions of "Wollensak Stereo 10"
Hanskerensky (talk | contribs) (/photos/macspics123/7354267922 added from pool) |
Hanskerensky (talk | contribs) m (Removed commented out Image, Image still not present) |
||
Line 1: | Line 1: | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
{{Flickr_image | {{Flickr_image | ||
|image_source= http://www.flickr.com/photos/macspics123/7354268390/in/pool-camerawiki/ | |image_source= http://www.flickr.com/photos/macspics123/7354268390/in/pool-camerawiki/ |
Revision as of 05:23, 26 June 2020
Wollensak Stereo 10 image by Colin MacDiarmid (Image rights) |
The Wollensak Stereo 10 is a 35mm stereo camera from the Wollensak Optical Company of Chicago, Illinois. It was introduced in about 1950. It has 35 mm f/2.7 lenses, and shutter speeds ½ - 1/300 second, plus 'B' and 'T', set by a ring on the right lens: the aperture is set by a matching ring on the left. The shutter is synchronised for bulb flash, with a hot shoe to accept the flash holder.
The camera has a coupled rangefinder, with an eyepiece separate from the viewfinder. It focuses down to 3 feet, using a knob on the top housing, positioned for the right thumb. The viewfinder eyepiece has a simple parallax adjustment, with just two positions, for 3-10 feet and 10 ft - infinity. There is also a bubble level, visible in the viewfinder.
Film advance is by a knob on the right, with a frame-counter around the knob.
The lenses accept Series V filters. Each lens has a threaded retaining ring at the front; these are removed to drop the filters into place, and the rings are replaced to retain the filters.
Wollensak Stereo 10, Lens image by Colin MacDiarmid (Image rights) |
Links
- Instructions for the camera, at Mike Butkus' Orphan Cameras (missing pp10-11)
- The Wollensak Stereo 10 at stereoscopy.com
- The Wollensak Stereo 10 at plants3d.org
- Cameras we use: The Wollensak Stereo 10 and Revere Stereo 33, Ray Moxom