Regula IId

From Camera-wiki.org
Revision as of 14:44, 22 December 2014 by Hanskerensky (talk | contribs) (Removed category K as this camera letter is already handled in sub category King)
Jump to: navigation, search

The Regula IId was a 35mm uncoupled rangefinder camera made at Bad Liebenzell in the Black Forest by King KG from 1954-56 as a part of their Regula brand.

The construction of the camera is mostly metal, the only plastic (maybe Bakelite) part is the film take-up; the camera feels very solid but not that heavy like the previous Regula I models. The film is advanced with a lever on the top of the camera, advancing the lever also cocks the shutter for the next shot, this is an advancement as with earlier Regula's you had to manually re-cock the shutter. If you remove the exposure window from inside the camera you can see this is achieved by a watch chain connected just above the film take-up to a spring loaded ratchet on the other side of the camera.

The film counter is under the film advance and will only count when there is film in the camera, when rewinding film it also goes backwards and this is a good way to tell if the film has been fully rewound as it will stop clicking once it has comes off the spool. The counter is driven via a toothed wheel that sits in the film perforations; it is also connected to a latch and will prevent the shutter from firing until the counter has increased by one. The film is rewound with a knob on the other side, you need to hold down a switch on the bottom of the camera whilst doing this.

The lens is a Cassar type (three element anastigmat) and goes from f/3.5 through to f/16. The shutter is a bit more basic with only 4 speeds and a bulb setting. The camera does have a 10 second self-timer using a lever under the lens. There is a PC flash sync point on the left side of the lens housing; if you want to use a modern flash unit with it you will need one with a PC lead, or a hot shoe to PC adapter.

The camera has a built in rangefinder but it isn't coupled to the lens, it is controlled with a dial under the film rewind; you focus in the viewfinder, read the distance on the dial and then set it on the focus ring at the front of the camera. The viewfinder itself is collimated but with no frame lines to help guide you.

Extinction Meter Guide

The camera has a built in extinction meter that is viewed through a separate window on the rear of the camera. To use the meter, look through the meter eyepiece with the camera pointing towards the subject. Note the last still well defined number on the scale and use this number on the table below to work out the exposure. When using the meter it is recommended to shield it from direct sunlight by using your hand as a shade above the camera.

This table was originally for ISO/ASA 40 film but i have converted it for use with ISO 100 film, times below 1 second would have to be done in bulb mode. The numbers can also be roughly converted to EV values for easier calculation. Using ISO 100 film, number 1 on the scale works out to EV 8 and number 8 on the scale works out to EV 15.

Aperture Exposure Table for Extinction Meter (ISO 100)
1 2 3 4 5 6 7 8
f/2.8 1/25 1/50 1/100 1/200 - - - -
f/3.5 & 4 1/10 1/25 1/50 1/100 1/200 - - -
f/5.6 1/5 1/10 1/25 1/50 1/100 1/200 - -
f/8 1/2 1/5 1/10 1/25 1/50 1/100 1/200 -
f/11 1s 1/2 1/5 1/10 1/25 1/50 1/100 1/200
f/16 2s 1s 1/2 1/5 1/10 1/25 1/50 1/100
EV Number 8 9 10 11 12 13 14 15