Praktica MTL 3
MTL 3 with Meyer-Orestegon 29mm f/2.8. |
The Praktica MTL 3 is an East German SLR made by Pentacon. It was produced in high numbers between 1978 and 1984. It is said to be based on the LTL 3. It's a solidly made camera with some rather crude and some advanced features.
The shutter
This is the best part about this camera. The MTL 3 has a metal curtain shutter. It moves vertically and is likely to work some 25 years after its production. Speeds are B, then from 1 to 1/1000 sec. It has a separate position for use with electronic flash units; this is "about" 1/125 sec according to the camera's manual. Its metal curtains are not known to get punctured easily as do cloth shutters.
Metering and Viewfinder
The MTL 3 has a metering system that is integrated in the mirror. This makes it important to handle the mirror with care, or rather, never to touch it at all. A needle on the right side of the viewfinder indicates the correct exposure; o is correct, + means overexposed, - underexposed. This metering system is the only battery-dependent system in the MTL 3. It takes a single 1.35v PX 625 mercury cell; without it, everything but the meter will continue to function. A switch next to the shutter release button stops down the lens and switches on the meter. This way, no battery power is wasted when the camera is not in use.
A black wedge on the left indicates the film has not yet been transported.
Lenses
Bottom plate: Ernemann tower and Q1 symbol. |
The standard lens supplied with the camera was a Pentacon 50mm f/1.8 lens. It has a m42 or Pentax thread. There's a switch on the lens to use it on auto or manual. The auto option allows full aperture composition even when the aperture ring is set to, say f/8. The lens is multicoated and has a 49mm filter thread.
Images
Links
- Notes about Praktica MTL-3
- Matt Denton's MTL-3
- MTL-3 on www.collection-appareils.fr by Sylvain Halgand