Difference between revisions of "Nikon FE2"

From Camera-wiki.org
Jump to: navigation, search
Line 14: Line 14:
  
 
== Features ==
 
== Features ==
The Nikon FE2 was the first camera to feature a minimum flash sync speed of 1/250th of a second. This is possible because of the advanced Titanium shutter, with speeds from 8 seconds to 1/4000th of a second (actually in "A" mode the FE2 can expose much longer than 8 seconds). Similar to most Nikon models from the period, the FE2 features the 60/40 integral metering system. Initially Nikon planned to use the new matrix system, which was then under development in the FE2, but it was not ready on time and therefore was first installed in the [[Nikon FA]].
+
The Nikon FE2 was the first camera to feature a minimum flash sync speed of 1/250th of a second. This is possible because of the advanced Titanium shutter, with speeds from 8 seconds to 1/4000th of a second (actually in "A" mode the FE2 can expose much longer than 8 seconds). Similar to most Nikon models from the period, the FE2 features the 60/40 integral metering system. Initially Nikon planned to use the new matrix system, which was then under development in the FE2, but it was not ready on time and therefore was first installed on the [[Nikon FA]]. The Nikon FE2 has only a few bells and whistles, but it is extremely well built and therefore still sought after today (2010) by users.
  
 
== Links ==
 
== Links ==

Revision as of 01:41, 4 April 2010

The FE2 was a 35mm SLR from Nikon, which was launched in 1983 as the successor to the Nikon FE. It was manufactured until 1987. In 2006, Nikon launched the Nikon FM3A as the successor to this camera as well as the Nikon FM2. Unlike the Nikon FE, the Nikon FE2 cannot use non-Ai Nikkor lenses because the Ai prong cannot be flipped up. Most Ai-type Nikkor lenses, as well as Autofocus Nikkors up to, but not including the "G" series of lenses, will work with the FE-2.

Features

The Nikon FE2 was the first camera to feature a minimum flash sync speed of 1/250th of a second. This is possible because of the advanced Titanium shutter, with speeds from 8 seconds to 1/4000th of a second (actually in "A" mode the FE2 can expose much longer than 8 seconds). Similar to most Nikon models from the period, the FE2 features the 60/40 integral metering system. Initially Nikon planned to use the new matrix system, which was then under development in the FE2, but it was not ready on time and therefore was first installed on the Nikon FA. The Nikon FE2 has only a few bells and whistles, but it is extremely well built and therefore still sought after today (2010) by users.

Links

In English:

In French: