Difference between revisions of "Leica M4"
(→Leica M4-P: Small revisions) |
(→Leica M4-P) |
||
Line 55: | Line 55: | ||
|} | |} | ||
− | Built from 1980 to 1986, with serial numbers from 1543351 to 1692950, successor to the M4-2 and likewise made in Canada. The main difference is six viewfinder frames for 28/35/50/75/90/135 lenses by | + | Built from 1980 to 1986, with serial numbers from 1543351 to 1692950, successor to the M4-2 and likewise made in Canada. The main difference is six viewfinder frames for 28/35/50/75/90/135 lenses by displaying the following combinations: 35/135mm, 50/75mm, and 28/90mm. 28mm and 75mm frames were added for newer lenses. The M4-P also has the .72 magnification viewfinder found in the [[Leica M6|M6]] and available for the [[Leica M7|M7]]. |
Most M4-Ps were finished in black chrome, while some silver-chrome units were also available. [[Leica M6|M6]] started production in 1984, overlapping production of the M4-P, and later M4-Ps shared the same rangefinder as the M6. | Most M4-Ps were finished in black chrome, while some silver-chrome units were also available. [[Leica M6|M6]] started production in 1984, overlapping production of the M4-P, and later M4-Ps shared the same rangefinder as the M6. |
Revision as of 14:11, 13 January 2013
Photo of Leica M4 with Summicron-M 50mm/2 Dual Range equipped for close-up use. image by Christopher Robin Roberts |
The Leica M4 was introduced in 1967, replacing the 1954 Leica M3 with a number of improvements; particularly much improved film handling and viewfinder bright lines for wide angle lenses.
Like the M3, the M4 is an all mechanical manual exposure rangefinder camera without a built in exposure meter.
The M4 was Leica's last camera produced largely with hand assembly.
Leica M4-2
| ||
|
Following the disastrous M5, the M4 was reintroduced in 1978 as the M4-2 manufactured in Canada, with only detail differences. Manufacture was simplified and largely mechanised, reducing the very high cost of earlier production.
For the first time a hotshoe was fitted, i.e. flash shoe with electrical contact (previously, flash triggering was only possible with a cable).
Also, provision was made for a motor winder which would fit all subsequent M cameras up to the M7 (but not the earlier M5).
Leica M4-P
|
Built from 1980 to 1986, with serial numbers from 1543351 to 1692950, successor to the M4-2 and likewise made in Canada. The main difference is six viewfinder frames for 28/35/50/75/90/135 lenses by displaying the following combinations: 35/135mm, 50/75mm, and 28/90mm. 28mm and 75mm frames were added for newer lenses. The M4-P also has the .72 magnification viewfinder found in the M6 and available for the M7.
Most M4-Ps were finished in black chrome, while some silver-chrome units were also available. M6 started production in 1984, overlapping production of the M4-P, and later M4-Ps shared the same rangefinder as the M6.
Links
- Leica M4-2 at Sylvain Halgand's www.collection-appareils.fr
- Leica M-series guide at Stephen Gandy's CameraQuest