Difference between revisions of "Futura Tele-Elor 5.6/90"
(Created page) |
m (Fixed layout slightly) |
||
Line 2: | Line 2: | ||
8-bladed diaphragm; circular at 1:5.6, remaining circular to 1:22. | 8-bladed diaphragm; circular at 1:5.6, remaining circular to 1:22. | ||
− | |||
− | |||
− | |||
{{Flickr_image | {{Flickr_image | ||
Line 15: | Line 12: | ||
}} | }} | ||
+ | ==Lens mount== | ||
This particular lens (serial <code>T77xx</code>) has a non-backwards-compatible lens mount, hereby referred to as the ''S variant. '' | This particular lens (serial <code>T77xx</code>) has a non-backwards-compatible lens mount, hereby referred to as the ''S variant. '' | ||
This incompatibility takes the form of a tab at 9 o'clock (looking at the lens from the flange side) which mates with a groove in the shutter's shroud baffle; earlier cameras lack this groove and attempting to mount this lens will damage their baffling. This tab (visible to the left) allows the 50mm focus helicoid to drive the longer lens through its travel. | This incompatibility takes the form of a tab at 9 o'clock (looking at the lens from the flange side) which mates with a groove in the shutter's shroud baffle; earlier cameras lack this groove and attempting to mount this lens will damage their baffling. This tab (visible to the left) allows the 50mm focus helicoid to drive the longer lens through its travel. | ||
− | == Compatibility == | + | === Compatibility === |
− | + | This lens has been tested and will mount on: | |
− | *[[Futura S]] | + | * [[Futura S]] |
− | + | Non-compatible: | |
*[[Futura (Standard)]] | *[[Futura (Standard)]] | ||
Revision as of 12:05, 10 April 2011
90mm telephoto lens produced by Futura Kamerawerk in Freiburg, Breisgau, Germany during the (likely late) 1950's.
8-bladed diaphragm; circular at 1:5.6, remaining circular to 1:22.
Tele-Elor 5.6/90 mount image by Ryan Volpe {{ (Image rights)}} |
Lens mount
This particular lens (serial T77xx
) has a non-backwards-compatible lens mount, hereby referred to as the S variant.
This incompatibility takes the form of a tab at 9 o'clock (looking at the lens from the flange side) which mates with a groove in the shutter's shroud baffle; earlier cameras lack this groove and attempting to mount this lens will damage their baffling. This tab (visible to the left) allows the 50mm focus helicoid to drive the longer lens through its travel.
Compatibility
This lens has been tested and will mount on:
Non-compatible:
Untested with:
- Futura P
- Futura S III (likely)