Difference between revisions of "Ferrotype"
m (horrible mistake fixed, sorry) |
m (now it's OK) |
||
Line 18: | Line 18: | ||
As the process could be carried out inside the camera and needed no drying time, dry ferrotypes were popular with "while-you-wait" beach and street photographers<ref>''Focal Encyclopedia of Photography'', Focal Press, 1976 edition, p.588</ref>. Some cameras were advertised specifically for this purpose, such as the [[Mandel-ette]]. | As the process could be carried out inside the camera and needed no drying time, dry ferrotypes were popular with "while-you-wait" beach and street photographers<ref>''Focal Encyclopedia of Photography'', Focal Press, 1976 edition, p.588</ref>. Some cameras were advertised specifically for this purpose, such as the [[Mandel-ette]]. | ||
− | Since the image be | + | Since the image must be viewed from the silvered side of (non-transparent!) plate, the image is left-right reversed (mirror-imaged) - a fault shared with most [[Daguerreotype Process|Daguerreotypes]]. |
The process was used in the US until the early 1940s. | The process was used in the US until the early 1940s. |
Revision as of 10:12, 29 July 2009
young American | American couple | American family | two gentlemen | two young ladies |
Ferrotypes (also known {in the USA} as Tintypes) are photographs made onto black-enamelled iron plates by the wet-collodion process. The black background made the transparent areas of the negative image appear black, and the dark, silvered areas were whitened using mercuric bichloride, and so appear light - in the same way as glass Ambrotypes.
French photographer Adolphe A Martin was the first to use this process, in 1853. A dry ferrotype processes later replaced the wet-plate system. As the process could be carried out inside the camera and needed no drying time, dry ferrotypes were popular with "while-you-wait" beach and street photographers[1]. Some cameras were advertised specifically for this purpose, such as the Mandel-ette.
Since the image must be viewed from the silvered side of (non-transparent!) plate, the image is left-right reversed (mirror-imaged) - a fault shared with most Daguerreotypes.
The process was used in the US until the early 1940s.
- ↑ Focal Encyclopedia of Photography, Focal Press, 1976 edition, p.588