Difference between revisions of "Ferrotype"
(link -> Mandel-ette) |
m (adde word to be) |
||
Line 1: | Line 1: | ||
− | { | + | {{stub}} |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
'''Ferrotypes''' (also known {in the USA} as '''Tintypes''') are photographs made onto black-enamelled iron plates by the [[wet-collodion ]]process. The black background made the transparent areas of the negative image appear black, and the dark, silvered areas were whitened using mercuric bichloride, and so appear light - in the same way as glass [[Ambrotype]]s. | '''Ferrotypes''' (also known {in the USA} as '''Tintypes''') are photographs made onto black-enamelled iron plates by the [[wet-collodion ]]process. The black background made the transparent areas of the negative image appear black, and the dark, silvered areas were whitened using mercuric bichloride, and so appear light - in the same way as glass [[Ambrotype]]s. | ||
French photographer Adolphe A Martin was the first to use this process, in 1853. | French photographer Adolphe A Martin was the first to use this process, in 1853. | ||
A dry ferrotype processes later replaced the wet-plate system. | A dry ferrotype processes later replaced the wet-plate system. | ||
− | As the process could be carried out inside the camera and needed no drying time, dry ferrotypes were popular with "while-you-wait" beach and street photographers<ref>''Focal Encyclopedia of Photography'', Focal Press, 1976 edition, p.588</ref> | + | As the process could be carried out inside the camera and needed no drying time, dry ferrotypes were popular with "while-you-wait" beach and street photographers<ref>''Focal Encyclopedia of Photography'', Focal Press, 1976 edition, p.588</ref>. |
− | Since the image must viewed from the silvered side of (non-transparent!) plate, the image is left-right reversed (mirror-imaged) - a fault shared with most [[Daguerreotype Process|Daguerreotypes]]. | + | Since the image must be viewed from the silvered side of (non-transparent!) plate, the image is left-right reversed (mirror-imaged) - a fault shared with most [[Daguerreotype Process|Daguerreotypes]]. |
The process was used in the US until the early 1940s. | The process was used in the US until the early 1940s. |
Revision as of 10:09, 29 July 2009
Ferrotypes (also known {in the USA} as Tintypes) are photographs made onto black-enamelled iron plates by the wet-collodion process. The black background made the transparent areas of the negative image appear black, and the dark, silvered areas were whitened using mercuric bichloride, and so appear light - in the same way as glass Ambrotypes.
French photographer Adolphe A Martin was the first to use this process, in 1853. A dry ferrotype processes later replaced the wet-plate system. As the process could be carried out inside the camera and needed no drying time, dry ferrotypes were popular with "while-you-wait" beach and street photographers[1].
Since the image must be viewed from the silvered side of (non-transparent!) plate, the image is left-right reversed (mirror-imaged) - a fault shared with most Daguerreotypes.
The process was used in the US until the early 1940s.
- ↑ Focal Encyclopedia of Photography, Focal Press, 1976 edition, p.588