Depth of field
See also Lens: Depth of field
Depth of field is a measure of the zone of distances (from near to far) that are within acceptable sharpness at a given aperture and focus distance. "Acceptable" sharpness is subjective and becomes more critical for larger prints or projection.
When a lens is focused on a subject at a given distance, all subjects at that distance are sharply focused. In theory, subjects that are not at the same distance are out of focus, and thus not sharp. However, since human eyes cannot distinguish very small degree of unsharpness, some subjects that are in front of and behind the sharply focused subjects may still appear to be sharp. This zone of acceptable sharpness is referred to as the depth of field. Thus, increasing the depth of field increases the perceived sharpness of an image. Using smaller apertures or larger distances increases the depth of field.
Depth of field extends further behind the plane of focus than in front and the difference increases with distance. This can be used to good effect by the so-called hyperfocal setting. For example, for a landscape photograph using a 50mm lens at f8 if, instead of focussing normally, the depth-of-field scale is used to set infinity at the f8 marking then the theoretical depth of field extends forward to 5 metres. In other words, the lens is focussed at 10 metres instead of infinity taking advantage of depth of field to bring more of the scene into focus.
Depth of field is proportional to distance from the lens optical centre to the subject, not film plane to subject. This explains why depth of field reduces dramatically when the subject is very close, since subject distance from the optical centre has reduced proportionally more than overall distance. At long distances the small difference between film plane and optical centre is insignificant.
As aperture is reduced depth of field increases, however diffraction then comes into play and decreases overall sharpness.
Depth of field has nothing to do with lens construction, it is a purely geometric property. Whether zoom or prime (fixed) lens, regardless of how many elements, whether wide angle or telephoto, depth of field is the same for a given f stop and magnification at the film plane or image sensor. Depth of field is commonly thought to be related to focal length, but is actually related to magnification. Changing to a longer focal length or moving closer to the subject both have the same effect of increasing magnification and reducing depth of field.
A lens with poor resolution may appear to have greater depth of field but this is simply due to none of the picture being truly sharp. Low cost cameras with fixed focus lenses take advantage of this effect.
Photographers sometimes intentionally seek shallow depth of field—for example, to help isolate a subject. The amount by which a distant background is blurred depends largely on a lens's entrance pupil diameter, at the selected f-stop. Thus a fast lens of longer focal length will give the greatest background blurring; but the depth of the zone that is in sharp focus follows the rule above.
|
|
|
| ||||||||
|
Effects of increasing Depth of Field | |||||||||||
Links
- "Depth of field" at Wikipediia
- Depth of field explained by Dr. Ching-Kuang Shene
- Online depth-of-field calculator from DOFMaster.com
- More online calculators for hyperfocal distance and DOF, from John Hendry
- "Depth of Field and Bokeh" by Dr. Hubert Nasse, a white paper from Carl Zeiss Camera Lens News
