Difference between revisions of "Depth of field"
m (→Links: rm broken link) |
(Clarification) |
||
| Line 1: | Line 1: | ||
'''see also''' [[lens#Depth of field|lens]] | '''see also''' [[lens#Depth of field|lens]] | ||
| − | + | ''Depth of field'' is a measure of the zone of distances (from near to far) that are within acceptable sharpness at a given aperture and focus distance. "Acceptable" sharpness is subjective and becomes more critical for larger prints or projection. | |
| − | When a lens is focused on a subject at a given distance, all subjects at that distance are sharply focused. In theory, subjects that are ''not'' at the same distance are out of focus, and thus not sharp. However, since human eyes cannot distinguish very small degree of unsharpness, some subjects that are in front of and behind the sharply focused subjects may still appear to be sharp. | + | When a lens is focused on a subject at a given distance, all subjects at that distance are sharply focused. In theory, subjects that are ''not'' at the same distance are out of focus, and thus not sharp. However, since human eyes cannot distinguish very small degree of unsharpness, some subjects that are in front of and behind the sharply focused subjects may still appear to be sharp. This zone of acceptable sharpness is referred to as the depth of field. Thus, increasing the depth of field increases the perceived sharpness of an image. Using smaller apertures or larger distances increases the depth of field. |
| − | + | Depth of field extends further behind the plane of focus than in front and the effect increases with distance. This can be used to good effect by using the so-called hyperfocal setting. For example, for a landscape photograph using a 50mm lens at f8 if, instead of focussing normally, the depth-of-field scale is used to set infinity at the f8 marking then the theoretical depth of field extends back to 5 metres. In other words, the lens is focussed at 10 metres instead of infinity taking advantage of depth of field to bring more of the scene into focus. | |
== Links == | == Links == | ||
Revision as of 18:59, 29 January 2012
see also lens
Depth of field is a measure of the zone of distances (from near to far) that are within acceptable sharpness at a given aperture and focus distance. "Acceptable" sharpness is subjective and becomes more critical for larger prints or projection.
When a lens is focused on a subject at a given distance, all subjects at that distance are sharply focused. In theory, subjects that are not at the same distance are out of focus, and thus not sharp. However, since human eyes cannot distinguish very small degree of unsharpness, some subjects that are in front of and behind the sharply focused subjects may still appear to be sharp. This zone of acceptable sharpness is referred to as the depth of field. Thus, increasing the depth of field increases the perceived sharpness of an image. Using smaller apertures or larger distances increases the depth of field.
Depth of field extends further behind the plane of focus than in front and the effect increases with distance. This can be used to good effect by using the so-called hyperfocal setting. For example, for a landscape photograph using a 50mm lens at f8 if, instead of focussing normally, the depth-of-field scale is used to set infinity at the f8 marking then the theoretical depth of field extends back to 5 metres. In other words, the lens is focussed at 10 metres instead of infinity taking advantage of depth of field to bring more of the scene into focus.
Links
- Depth of field explained by Ching-Kuang Shene
