Difference between revisions of "Agfa PD 16 (folder)"

From Camera-wiki.org
Jump to: navigation, search
m (Added category)
m (616 now a page link)
Line 8: Line 8:
 
}}{{stub}}
 
}}{{stub}}
  
The '''Agfa PD 16''' or '''[[Agfa Ansco]] PD 16''' were a series of folding cameras for type [[PD16]] roll film (equivalent to Kodak's designation 616). Many models are distinguished only by the lens designations Antar (f/14), or Tripar (f/11). Others are designated "Plenax" (regardless of lens type), and these include a few higher-specification models with Hypar f/6.3 Anastigmat lenses, and shutters offering T, B, 100, 50, and 25 settings.
+
The '''Agfa PD 16''' or '''[[Agfa Ansco]] PD 16''' were a series of folding cameras for type [[PD16]] roll film (equivalent to Kodak's designation [[http://camera-wiki.org/wiki/116_film|616]]). Many models are distinguished only by the lens designations Antar (f/14), or Tripar (f/11). Others are designated "Plenax" (regardless of lens type), and these include a few higher-specification models with Hypar f/6.3 Anastigmat lenses, and shutters offering T, B, 100, 50, and 25 settings.
  
 
The [[Agfa PD16 Clipper]] was a completely different collapsing design, but accepting the same film size.
 
The [[Agfa PD16 Clipper]] was a completely different collapsing design, but accepting the same film size.

Revision as of 04:27, 3 September 2023

This article is a stub. You can help Camera-wiki.org by expanding it.

The Agfa PD 16 or Agfa Ansco PD 16 were a series of folding cameras for type PD16 roll film (equivalent to Kodak's designation [[1]]). Many models are distinguished only by the lens designations Antar (f/14), or Tripar (f/11). Others are designated "Plenax" (regardless of lens type), and these include a few higher-specification models with Hypar f/6.3 Anastigmat lenses, and shutters offering T, B, 100, 50, and 25 settings.

The Agfa PD16 Clipper was a completely different collapsing design, but accepting the same film size.

All of the punctuation variations PD 16, PD-16, and PD16 may be encountered, as the company itself was not consistent.