Polaroid SX-70

From Camera-wiki.org
(Redirected from Sx70)
Jump to: navigation, search

The SX-70 is a folding single lens reflex Land Camera first produced by the Polaroid Corporation in 1972. It was the first instant SLR in history, and the first camera to use Polaroid's new integral print film, which developed automatically without the need for intervention from the photographer. This was revolutionary at the time, and a precursor to today's 600 and Spectra films.

The SX-70 has a folding body design, a 4-element 116mm f/8 glass lens, and an automatic exposure system. The camera allows manual focus as close as 10.4 inches (26.4cm), and has a shutter speed range from 1/175s to more than 10 seconds. The top of the face contains two adjustment wheels. The right hand side one is used for focusing, the left is used for darken and light control. A variety of models was offered, though all share the same basic design. All models feature an electronically controlled 'flash-bar' socket across the top of the camera, for insertion of a 10-times use flashbulb unit. Polaroid - as well as other companies - made external flash units that plugged into this socket. As well as the folding SLR model, a variety of non-folding, 'consumer'-type models were released that also used to SX-70 integral film.


Variations

The original cameras had a basic matte focusing screen, later revisions had a circular split image rangefinder focusing aid. Some have additional labels such as BC which were models sold at Kmart stores, or SE Special Edition models are usually black with a blue shutter release button. Special editions models tend to have a longer 5 year warranty, and well as a exposure exchange program. Sending back 8-10 unwanted photos along with a coupon would yield a new replacement pack of film.

In 1974 a SX-70 Model 2 was available, usually with a white plastic body and brown leather skin or black body with brown skin. The Polaroid SX-70 Model 3 available a year later departs from the other models since it isn't a SLR, but instead has the viewfinder cut into the mirror hood.

In 1977, a revision of the camera was offered called SX-70 Land Camera Alpha 1. [1]This revision added tripod socket, as well as strap lugs. Some have additional marking such as Sears Special. Revue branded versions were distributed in Foto-Quelle stores. Alpha 1 Model 2 are also available, but without the silver chrome finish, instead it uses a black plastic finish.

Later models introduced in 1978 have an ultrasonic rangefinder autofocusing system known as Sonar. These are based on the Alpha bodies and is released as the SX-70 Sonar OneStep and SX-70 Sonar AutoFocus. Half pressing the shutter release will prefocus and the view finder will zoom. Sonar models can also be manually focused, to do so press a switch on the focusing module to release the linkage. Because they are primarily designed to be automatic focusing, the screens do not have a focusing aid. The finder does have a low light warning LED. The SX-70 Polasonic Autofocus is introduced in 1979 followed by the TimeZero SX-70 AutoFocus in 1981, again similar to previous releases Model 2's are also available with slightly different cosmetics at a lower price; distribution as Sears Special and Special Edition with similar characteristics to the previous models are also common. This camera design finished in 1982 with the Polaroid SLR 680 and the Polaroid SLR 690 from 1996 which uses 600 film and has electronic flash.


Accessories

Though expensive, the SX-70 was popular in the 1970s and retains a cult following today. As such, many unique accessories were produced for the SX-70 including:

  • Telephoto lens - A teleconverter (pictured below) which gave an effective 1.5x conversion (to 174mm)
  • Close-Up kit - a set of macro-photography lenses coupled with flash adaptors/diffusers
  • Self-timer - a clockwork timer that clips onto the side of the unit, covering the shutter release button
  • External flash - Several models were made, including several by third parties.
  • Tripod Adaptor - Many earlier models of the SX-70 did not have tripod mounts built-in.
  • Ikelite made an underwater housing for the SX-70.[9]


Image manipulation

One feature of the SX-70's integral print film is its ability to be manipulated while still developing. Because it is an instant film and develops over a period of several minutes, artists are able to "push" the emulsion material around the photograph to produce effects somewhat like impressionist paintings.

Film issues

Polaroid's SX-70 film was last produced in December 2005, and was sold out by March, 2006. What little remains often suffers from flat batteries or dried-up chemicals. A film called Artistic Time Zero could be manipulated as the photo developed, by pushing the colours around before they set. SX-70 five alternatives for shooting film, four of which will allow the use of readily available, inexpensive 600/779 film in their cameras, and the fifth of which provides a private-labelled 600 variant that can be used as if it actually were the earlier film.

Polaroid 600 Film

First, some SX-70 owners modify their cameras to use Polaroid's more recent 600 film, which is easier to find despite also being out of production. SX-70 and 600 film packs are slightly different, however, as the 600 pack has some extra little 'nubs' at the front of the pack. Users can use an old photo or a dark slide from a used Polaroid film cartridge to help slide the 600 film into the camera or just remove the nubs from the cartridge using nail clippers.

The real problem with using 600 or 779 film is that it is significantly faster than SX-70 film (ISO 640 as opposed to ISO 150), causing serious overexposure by the old cameras. To address this issue, some simply set the exposure dial all the way to "darken" and replace the small Neutral Density filter over the electronic eye with a similar clear filter. Polaroid itself recommends placing a 1-stop ND filter over the lens, and replacing the small ND filter over the electronic eye with a clear piece of plastic (as from a CD case). But, even with these modifications, SX-70 users may find they still need to set the exposure controls fully to "darken."

Second, perhaps the most effective solution is to adapt the SX-70's exposure sensors and electronics to accept the current film's higher speed. A professional conversion of the camera can be obtained from a technician on the US West Coast, and possibly others. He adapts the electronics of the camera so that the light sensors and circuits will operate at the ASA 640 speed of the film, as opposed to the ASA 150 speed of the earlier film. The benefit of this procedure is that the camera can take advantage of the far faster, modern film without the use of filters or other apparatus.

Third, It has been determined that a 28 mm, threaded, ND-4 filter, or a similarly-sized, quality glass 2-stop Neutral Density [ND-4] filter can be gently screwed into the barrel or placed over the lens of a folding SX-70, to "fool" the camera into believing that the 600 film inside is actually the ASA 150 film it was intended to use. This works quite well, and the cost for a good filter is between US$30 and $85. There is also a thin gel filter available, which is glued onto the front of the folding SX-70's lens. One of these typically costs about US$15, but it is far less durable than a good glass filter. The disadvantage of most glass filters is that [a] they must be removed in order to close the camera [and reinstalled for the next use], and [b] they darken the view through the SLR viewfinder to the extent that focusing is almost impossible in low-light situations.

Fourth, there is a laminated film filter that can be slipped into the 600 film cartridge before it is installed into the camera. It is slid into the pack above the dark slide, but under the cartridge's edges. In use, it is directly in contact with the photo film, as was the dark slide, so that there is no space between it and the photo to permit light bending and distortion. The "PackFilter" is removable when the cartridge is empty, and can be used indefinitely. It is washable, in the event of too much handling, and the ND film is well protected with a special, heavy, durable polyester laminate on both sides. Even so, it is less than 10μm thick. It is also somewhat more than ND-4, since the 600 film is actually ASA 640 [more than two stops faster than TimeZero film], and the 30-year-old SX-70's have often slowed down a bit over time, increasing their tendency to overexpose. Another advantage is that they can be used in any camera intended for SX-70 film, not just folding SX-70 SLR's. Their disadvantage is that they are easy to throw away with an exposed film cartridge.

Fifth, and finally, an Austrian company called Unsaleable has contracted with the Polaroid film plant in the Netherlands to Private Label a variant of 600 film for them, using the old TimeZero film cartridge design, without the annoying "nubs". As described by its US distributor, below, it works beautifully, on the same basic principle as the PackFilter, above. Its only disadvantage is that is costs more than twice as much as 600 film purchased from any mass merchandiser.

Polaroid SX-70 Blend Film

In October 2006, a brand new SX-70 film was introduced. According to its producer, it uses an internal neutral-density filter and modified chemistry to yield vibrant colors, strong contrast, and high resolution. This professional-grade film was made by Polaroid in the Netherlands. As the cartridge is made to its original specifications and the ND filter is placed over the film and not the lens, it allows for full and normal use of all the camera's functions. The only disadvantage is that this film is not "manipulable" as was the original SX-70 film, a disappointing loss to artists who could make original prints look like paintings simply by manipulating the gels and chemicals inside the photo by carefully pushing them around.

The Impossible Project

A company known as The Impossible Project, has introduced the newly-manufactured SX-70 compatible film in black & white on March 22, 2010, with the old Polaroid factory in Enschede being the manufacturing base.

Notes

Links