Flexora

From Camera-wiki.org
Jump to: navigation, search

The Flexora was the first of that line of TLRs made by Lipca, Barntrup. It is in fact a continuation of the Flexo which had to change name after a trademark dispute with Franke & Heidecke. Production started in 1951 and ended that same year when the Flexora II came out.

It was sold with the following Lens/Shutter combinations :

  • Type I, an Enna Ennar 4.5/7.5cm taking lens in a Vario shutter.
  • Type II, an Enna Ennar 3.5/7.5cm taking lens in a Prontor-S shutter.
  • Type III, an Enna Ennagon 3.5/7.5cm taking lens in a Prontor-S shutter.

All taking lenses are coated.

Focusing is done by an anchor under the taking lens, like on the Minolta Autocord I and the Meopta Flexaret VII. It takes 6×6 pictures on 620 or 120 film. The film is transported with a knob on the right of the camera. An odd series of apertures 3.5, 4.5 5.3, 8, 12, 18 and 25 is marked on a scale under the taking lens.

A Frame-counter/Transport-stop was an option for the Flexora. This frame-counter was delivered to Lipca by Plaubel and closely resembles the counter Plaubel used on their prewar Roll-Op folding camera.

The Flexo Richard and Richard Reflex are name variants of both the Flexora and Flexora II produced for a Swiss distributor c1952. For further details see the page of the Flexora II.

Bibliography

  • Personal Lipca research documentation, courtesy of long time Lipca collector and history investigator Herr Ulf Schopfer, Bad Pyrmont, Germany
  • Peter Barz, article "Lipca Teil 1, eine Neugründung der Nachkriegszeit" in the German magazine "Photographica Cabinett 25/02"
  • Peter Barz, article "Lipca Teil 2, Die Kameras de Lippischen Camerafabrik Richter & Fischer GmbH, Barntrup" in the German magazine "Photographica Cabinett 26/02"
  • Photo Porst Catalog (German) 1952, page 167