Difference between revisions of "Rolleiflex old standard model"

From Camera-wiki.org
Jump to: navigation, search
(clarifying confusing name)
(added period and more clarification of model changes.)
Line 1: Line 1:
 
The old standard model of '''[[Rolleiflex]]''' was made by ''[[Rollei|Franke & Heidecke]]'' in Braunschweig, Germany, from 1932 to 1938. (This camera is also called the "original standard," confusingly: it is not the same as the [[Original Rolleiflex 6×6]].) Obviously, "old standard" was not the name at the introduction; it became known by this name after the introduction of the ''new standard'' in 1939. These names are not to be found anywhere on the camera; Rolleiflexes are generally dated and identified by serial numbers. The war photographer Robert Capa, later a co-founder of Magnum, used an old standard Rolleiflex (as well as a [[Contax rangefinder|Contax]]) during World War II.  
 
The old standard model of '''[[Rolleiflex]]''' was made by ''[[Rollei|Franke & Heidecke]]'' in Braunschweig, Germany, from 1932 to 1938. (This camera is also called the "original standard," confusingly: it is not the same as the [[Original Rolleiflex 6×6]].) Obviously, "old standard" was not the name at the introduction; it became known by this name after the introduction of the ''new standard'' in 1939. These names are not to be found anywhere on the camera; Rolleiflexes are generally dated and identified by serial numbers. The war photographer Robert Capa, later a co-founder of Magnum, used an old standard Rolleiflex (as well as a [[Contax rangefinder|Contax]]) during World War II.  
  
Franke & Heidecke had introduced the 6×6 [[TLR]] design in 1929 with their [[Original Rolleiflex 6×6|original Rolleiflex]]. The "old standard" had several improvements over the 1929 model, like lever film transport, a sports finder and improved shutter speeds
+
Franke & Heidecke had introduced the 6×6 [[TLR]] design in 1929 with their [[Original Rolleiflex 6×6|original Rolleiflex]]. The "old standard" had several improvements over the 1929 model, like improved shutter speeds, crank film transport, and a sports finder giving a very different appearance to the viewing hood.
  
 
== Finder ==
 
== Finder ==

Revision as of 23:39, 20 July 2011

The old standard model of Rolleiflex was made by Franke & Heidecke in Braunschweig, Germany, from 1932 to 1938. (This camera is also called the "original standard," confusingly: it is not the same as the Original Rolleiflex 6×6.) Obviously, "old standard" was not the name at the introduction; it became known by this name after the introduction of the new standard in 1939. These names are not to be found anywhere on the camera; Rolleiflexes are generally dated and identified by serial numbers. The war photographer Robert Capa, later a co-founder of Magnum, used an old standard Rolleiflex (as well as a Contax) during World War II.

Franke & Heidecke had introduced the 6×6 TLR design in 1929 with their original Rolleiflex. The "old standard" had several improvements over the 1929 model, like improved shutter speeds, crank film transport, and a sports finder giving a very different appearance to the viewing hood.

Finder

The finder is the best part about this Rolleiflex. When looking into the waist-level finder, the photographer finds a relatively clear ground glass screen. To help keep vertical lines vertical, this Rolleiflex has a built-in spirit level, visible in the finder. (In German it's called a Libelle.)

The sports finder is an advanced design. When looking through the opening, you see a cross with a little concave mirror in the middle. There's a small hole in this mirror. The iris of your eye is reflected in the mirror and the small hole helps you center your object in the frame.

Shutter

The shutter is a Compur Rapid B, 1-500. The international shutter speed series is displayed, with the exception of 1/250s which is shown as 1/300s. Reportedly versions with a B, T, 1-300 Compur shutter also exist.

Shutter speed and aperture are visible in a window on top of the camera. On later Rolleiflexes they're set by two wheels on either side, but on this model they're set by two levers around the taking lens. The shutter is operated by a sort of pendulum below this lens. It is set by being moved from right to left and fired by being moved from left to right.

Lens and focus

The "old standard" has a Heidoscop-Anastigmat 75/3.1 viewing lens and an uncoated Carl Zeiss Tessar 75mm with maximum apertures of f/3.5, f/3.8 or f/4.5.

The focusing knob is engraved with distances from 1.7m to infinity. It is surrounded by a depth-of-field scale. It is however possible to turn the knob a second turn for closer focusing. The distances below 1.7m are not marked on the scale, but you still can focus on them. This is not a malfunction: its operation is described in the manual. Lenses do not yet have a bayonet mount; they accept push-on filters and hoods.

Film formats, backs and transport

The manual states that it takes 2 1/4 ×2 1/4 inch pictures on B II film. The camera accepts 120 film. The hinged back could be replaced by plate adapters. This model of Rolleiflex introduced lever advance of the film. (The earlier model had had a knob.) Along with the lever came a frame counter that blocks after 12 shots. It then has to be reset to completely wind the film. There's no red window in the back to check how many shots have been taken. Transporting the film does not cock the shutter.

Links