Difference between revisions of "Perspective control lens"

From Camera-wiki.org
Jump to: navigation, search
Line 5: Line 5:
  
 
Because of the movement, shift lenses do not have automatic diaphragms and must be used in stop-down mode. Also it is common for the manufacturer to stipulate that smaller apertures should be used when the lens is shifted.
 
Because of the movement, shift lenses do not have automatic diaphragms and must be used in stop-down mode. Also it is common for the manufacturer to stipulate that smaller apertures should be used when the lens is shifted.
 
When the lens is shifted the viewfinder image darkens as effective aperture is reduced due to the oblique path of light rays. [[TTL]] metering will automatically allow for this.
 
  
 
==Usage==
 
==Usage==
 
In use the camera will be set up on a tripod and pointed at the subject with the line of sight near horizontal. Then (usually) the lens will be shifted upwards bringing the subject down into view without affecting perspective. The effect is exactly the same as moving the point of view (i.e. camera) upwards. Similar usage applies whether the required shift is horizontal or downwards.
 
In use the camera will be set up on a tripod and pointed at the subject with the line of sight near horizontal. Then (usually) the lens will be shifted upwards bringing the subject down into view without affecting perspective. The effect is exactly the same as moving the point of view (i.e. camera) upwards. Similar usage applies whether the required shift is horizontal or downwards.
 +
 +
When the lens is shifted the viewfinder image darkens as effective aperture is reduced due to the oblique path of light rays. [[TTL]] metering will automatically allow for this.
  
 
Photo editing software can correct perspective, along with other optical distortion, largely replacing the need for shift lenses.
 
Photo editing software can correct perspective, along with other optical distortion, largely replacing the need for shift lenses.

Revision as of 19:53, 9 February 2012

Shift lenses are produced for SLR cameras to allow perspective correction, preventing convergence of vertical lines typical when the camera is pointing upward or (less commonly) downward. This is especially useful for architectural photography. Compared with a technical camera, which allows full movement of lens and film back, a shift lens only offers limited horizontal and vertical movement. They are also known as PC ("perspective correction") in English, or PA ("Perspektivischer Ausgleich") in German. Shift lenses are always wide angle since the greater subject distance with long focus (telephoto) lenses results in much reduced convergance of vertical lines.

Construction

In order to allow movement, the lens must be constructed so that image coverage will be larger than the usual image size. This means that the projected image extends beyond the normal frame, resulting in a more complex lens usually with smaller maximum aperture. The lens itself can be physically shifted respective to the camera (slid by hand or screw adjuster) either vertically, horizontally, or in combination.

Because of the movement, shift lenses do not have automatic diaphragms and must be used in stop-down mode. Also it is common for the manufacturer to stipulate that smaller apertures should be used when the lens is shifted.

Usage

In use the camera will be set up on a tripod and pointed at the subject with the line of sight near horizontal. Then (usually) the lens will be shifted upwards bringing the subject down into view without affecting perspective. The effect is exactly the same as moving the point of view (i.e. camera) upwards. Similar usage applies whether the required shift is horizontal or downwards.

When the lens is shifted the viewfinder image darkens as effective aperture is reduced due to the oblique path of light rays. TTL metering will automatically allow for this.

Photo editing software can correct perspective, along with other optical distortion, largely replacing the need for shift lenses.

Glossary Terms