Kodak Brownie Hawkeye

From Camera-wiki.org
Revision as of 03:58, 16 March 2014 by Apollo (talk | contribs) (semicolon)
Jump to: navigation, search

The Kodak Brownie Hawkeye is a Bakelite box camera that takes 6x6cm images on 620 film, made in the USA and France by Kodak, between 1949-1961.[1] There were also examples labelled "Brownie Fiesta" and "Brownie Flash". The original design did not have a flash facility, but the Flash model was added in 1950 and called the Brownie Flash in France and the Kodak Brownie Hawkeye Flash in the USA. Earlier models of the camera have a metal film advance knob; later models have a knurled plastic knob.

The shutter has an instant setting but the precise speed is unknown, it is thought to be between 1/30th and 1/50th of a second.

  • Models Produced:
    • Non-Flash Models: May 1949 - November 1951
    • Flash Models: September 1950 - July 1961
  • Original Price:[2]
    • Camera: $7
    • Flash unit: $4

How to tell when a Kodak Brownie Hawkeye was made

Kodak used a system whereby the manufacture date of each camera can be ascertained. If one removes the back of the camera to examine the underside, where the exposed film spools go, one spots four letters printed in silver. These letters correspond to dates, using Kodak's code word "CAMEROSITY":

C A M E R O S I T Y
1 2 3 4 5 6 7 8 9 0

If a camera, for instance, has the letters CARM, it was manufactured in 12/53. Kodak used 13 4-week periods to divide up each year, [3] so those numbers would translate to the 12th 4-week period of 1953 (sometime between the latter half of November through the beginning of December).

Using 120 film in the camera

There are a few methods for this, some easy than others, most common listed here.

  • The Hawkeye can fit a 120 spool in the film side and still have the camera close, but a 120 spool will not fit in the take up side. If your camera came with an original empty 620 spool then you can use 120 film in the camera providing you use a 620 spool for the take up side. Some people have reported this method can make advancing the film a little harder, so if you have this then it is normal.
  • This is the same as the previous method but involves trimming excess plastic of the 120 spool with some scissors or nail clippers to make it fit better in the film side of the camera.[4]
  • If you have a few 620 spools you can re-spool 120 film on to 620 in a dark room or a film changing bag [5] so that you can use only 620 spools with no issues.

Modifying the camera

The camera can be modified to have features it lacked when produced, the most common ones are adding a tripod socket and a thread for a standard cable release [6] to make bulb exposures and portraits easier. Less common are adding strap lugs/rings to facilitate using a neck strap, [7] and modifying the camera to use a modern electronic flash unit. [8] One increasingly popular modification is the flip the lens to produce a new effect[9]. This effect is to reduce the focus area of the lens to between 2-5ft and generate soft focus edges. This modification is quite easy due to the ease with which the camera can be taken apart.


Gallery



References

Links