Difference between revisions of "Halina 6-4"

From Camera-wiki.org
Jump to: navigation, search
m (wrong lens name)
m (link)
Line 7: Line 7:
 
}}
 
}}
 
The '''Halina 6-4''' is a basic [[viewfinder camera]] made by [[Haking]] in Hong Kong.
 
The '''Halina 6-4''' is a basic [[viewfinder camera]] made by [[Haking]] in Hong Kong.
It has a focal-plane mask, allowing it to be set for taking either twelve 6x6cm or 16 4x4cm images on [[120 film]] - and there are two viewfinders and two [[red window]]s to accommodate the two sizes.
+
It has a focal-plane mask, allowing it to be set for taking either twelve 6×6cm or sixteen 4×4cm images on [[120 film]] - and there are two viewfinders and two [[red window]]s to accommodate the two sizes.
  
The lens is labelled "Halina Achromat", with a maximum aperture of f8, and Waterhouse stops for f11 and f16. The front-element focus is marked into three zones.
+
The lens is labelled "Halina Achromat", with a maximum aperture of f/8, and [[Waterhouse stops]] for f/11 and f/16. The front-element focus is marked into three zones.
  
 
The shutter is single speed + B, with double-exposure prevention interlock with the winder. Flash can be connected using a PC plug.
 
The shutter is single speed + B, with double-exposure prevention interlock with the winder. Flash can be connected using a PC plug.

Revision as of 18:33, 3 September 2008

This article is a stub. You can help Camera-wiki.org by expanding it.

The Halina 6-4 is a basic viewfinder camera made by Haking in Hong Kong. It has a focal-plane mask, allowing it to be set for taking either twelve 6×6cm or sixteen 4×4cm images on 120 film - and there are two viewfinders and two red windows to accommodate the two sizes.

The lens is labelled "Halina Achromat", with a maximum aperture of f/8, and Waterhouse stops for f/11 and f/16. The front-element focus is marked into three zones.

The shutter is single speed + B, with double-exposure prevention interlock with the winder. Flash can be connected using a PC plug.

The body has a lever in the base, detaching the back and baseplate for film loading. A small folding foot is built in to the bottom of the lens barrel to support the camera when standing on a flat surface.