Difference between revisions of "Four Thirds"

From Camera-wiki.org
Jump to: navigation, search
m (Image Sensor: sp)
m (Image Sensor)
Line 12: Line 12:
 
The actual size of the 4/3 sensor - specified by Olympus and a design constant in the 4/3rds system white paper - is 18mm × 13.5mm, with an imaging area of 17.3mm x 13.0mm. This gives the image a diagonal length of 21.6mm; the smallest of the common APS-C sensors used has a diagonal of 24.88mm with dimensions of 20.7mm x 13.8 mm.
 
The actual size of the 4/3 sensor - specified by Olympus and a design constant in the 4/3rds system white paper - is 18mm × 13.5mm, with an imaging area of 17.3mm x 13.0mm. This gives the image a diagonal length of 21.6mm; the smallest of the common APS-C sensors used has a diagonal of 24.88mm with dimensions of 20.7mm x 13.8 mm.
  
The diagonal length of the 4/3rds sensor is roughly half that of a 35mm film negative. The Four-Thirds system is often criticised for the small size of its sensor; referral to the diagram to the right will show that the sensor size is only very slightly smaller than the currently most popular entry-level DSLR, the [[Canon EOS 400D]]. Unlike the Canon EOS system however, Four-Thirds cameras are forever stuck at this sensor size, whereas many EOS system lenses can accommodate sensor sizes up to 35mm (as used on the [[Canon EOS 5D]].
+
The diagonal length of the 4/3rds sensor is roughly half that of a 35mm film negative. The Four-Thirds system is often criticised for the small size of its sensor; referral to the diagram to the right will show that the sensor size is only very slightly smaller than the currently most popular entry-level DSLR, the [[Canon EOS 400D]]. Unlike the Canon EOS system however, Four-Thirds cameras are forever stuck at this sensor size, whereas many EOS system lenses can accommodate sensor sizes up to 35mm (as used on the [[Canon EOS 5D]]).
  
 
The ratio of the image size, combined with the smaller sensor means that Four-Thirds based [[DSLR|DSLRs]] have a lens crop factor exactly 2 - that is to say, a 50mm film lens used on a Four-Thirds body gives the equivalent field of view to a 100mm lens on a 35mm film camera body.
 
The ratio of the image size, combined with the smaller sensor means that Four-Thirds based [[DSLR|DSLRs]] have a lens crop factor exactly 2 - that is to say, a 50mm film lens used on a Four-Thirds body gives the equivalent field of view to a 100mm lens on a 35mm film camera body.

Revision as of 03:46, 9 April 2007

Four-Thirds is a photographic system, similar in concept to Olympus' OM System for film photography. The name 'Four-Thirds' derives from the size and format of the image sensor used in the camera bodies. The system was developed by Olypmus in partnership with Kodak, and several other photographic companies have also signed up to it to produce lenses, cameras and accessories to the same standard. These companies include Panasonic, Sigma, Fujifilm and Leica.

Four-Thirds is not an open standard; Olympus controls access to the design specifications and no unauthorised third-party companies are able to use the Four-Thirds logo or create supported peripherals for the system.

Image Sensor

Unlike 35mm film (and therefore most APS-C sized sensors used by other big camera bands i.e. Nikon, Canon and Pentax), the Four-Thirds system uses a ratio of 4:3 for its image sensor - 35mm has a ratio of 3:2 (whereby the long edge of the rectangular sensor is either 4/3rds or 3/2 the length of the shorter side).

The actual size of the 4/3 sensor - specified by Olympus and a design constant in the 4/3rds system white paper - is 18mm × 13.5mm, with an imaging area of 17.3mm x 13.0mm. This gives the image a diagonal length of 21.6mm; the smallest of the common APS-C sensors used has a diagonal of 24.88mm with dimensions of 20.7mm x 13.8 mm.

The diagonal length of the 4/3rds sensor is roughly half that of a 35mm film negative. The Four-Thirds system is often criticised for the small size of its sensor; referral to the diagram to the right will show that the sensor size is only very slightly smaller than the currently most popular entry-level DSLR, the Canon EOS 400D. Unlike the Canon EOS system however, Four-Thirds cameras are forever stuck at this sensor size, whereas many EOS system lenses can accommodate sensor sizes up to 35mm (as used on the Canon EOS 5D).

The ratio of the image size, combined with the smaller sensor means that Four-Thirds based DSLRs have a lens crop factor exactly 2 - that is to say, a 50mm film lens used on a Four-Thirds body gives the equivalent field of view to a 100mm lens on a 35mm film camera body.

The 'crop factor' does affect the depth of field of the taken image: with a magnification of 2, the DOF is doubled. Returning to the above example, a 50mm f/1.4 OM lens used on a 4/3rds digital body becomes a 100mm f/1.4 lens with the same depth of field as a 35mm camera set at f/2.8. It is important to note that the light gathering ability of the lens is not affected however: a 50mm f/1.4 OM lens used on a 4/3rds digital body becomes a 100mm f/1.4 lens, with an increased depth of field.

This allows a photographer to use the lens at a lower F-stop than would be usable in 35mm or APS-C format, meaning faster shutter speeds and/or lower ISOs can be used.

Lenses

The principles outlined above in the design of the 4/3rds sensor also follow into the lens designs for the system: with a crop (or magnification) factor of 2, a telephoto lens for the 4/3rds system with the same field of view that of a lens designed for 35mm can be half the size.

For example, a 150mm lens fitted to a 4/3rds body produces the same field of view (and therefore effectively the same magnification) as a 300mm lens on a 35mm film camera. Not only does this mean 4/3rds lenses can be half the size of their 35mm counterparts, it also means it is much easier and cheaper to produce lenses with good focal length to f-stop ratios.

Most 4/3rds lenses are also telecentric, meaning that no matter what angle the light enters the lens, the glass within the lens is designed to ensure the beams of light hit the sensor straight on. This design requirement is due to the nature of digital sensors: they are highly sensitive to the angle at which light hits them, with highly angled photons not being picked up by the sensor at all.

The lens mount for 4/3rds is roughly twice that of the imaging sensor, again allowing improvements in lens design: with the lens focusing the image down to half the area before it hits the sensor, it allows the lenses to be brighter without sacrificing the size or weight advantages gained by the smaller sensor.

Camera Bodies

To date, three companies have produced camera bodies compatible with the Four-Thirds system:

Olympus

All Olympus' DSLR bodies conform exactly to the Four-Thirds specifications. As of July 2007, all of the current models will also feature 'Live-View', a feature which allows the camera to use the rear LCD display in a similar way to that used on compact digital cameras - showing a live display of the image being processed by the sensor. The latest bodies (E-410 and E-510) use the most advanced form of Live-View which allows autofocus, 10x magnification for manual focus, depth of field preview and exposure compensation preview.

All Olympus DSLR bodies also feature a patented 'Supersonic Wave Filter' dust removal system, which shakes a thin layer in front of the sensor using ultrasonic frequencies. This method of cleaning was first released into the market by Olympus, and reportedly remains the only truly successfully implemented anti-dust solution.

As befits the 4/3rds philosophy of small and light lenses, all Olympus' camera bodies are comparatively lightweight. The E-500 was the smallest and lightest DSLR at the time of its release; an accolade it recently lost to another Olympus camera: the new Olympus E-400/410.

Olympus have also announced the pending release of a successor to its the E-1, tentatively called the 'P-1'


Panasonic

Panasonic have released one camera for the Four-Thirds system; a camera that comes coupled with a Leica-badged, Panasonic-built optically stabilised lens. The camera is very much designed to look like an old Leica rangefinder-type camera, and in fact Leica later released a re-badged edition of this camera, naming it the Leica Digilux 3.


Leica

As well as releasing several lenses for the Four-Thirds system, legendary camera manufacturer Leica released a re-badged version of Panasonic's DMC-L1 for the Four-Thirds system.

Links