Difference between revisions of "Flash synchronisation"

From Camera-wiki.org
Jump to: navigation, search
(FP Sync)
(PC Sync)
Line 13: Line 13:
  
 
== Types of Flash Sync Connections ==
 
== Types of Flash Sync Connections ==
=== PC Sync ===
+
=== PC Terminal ===
description
+
A Prontor-Compur, or '''PC''', terminal is the standard method for connecting a flash head to a camera.  When the flash sync is triggered, a signal is sent from the camera along a wire to the flash telling it to fire.
  
 
=== Hot Shoe ===
 
=== Hot Shoe ===

Revision as of 13:52, 19 July 2005

Types of Flash Sync

M Sync

used for (now obsolete) flash bulbs

FP Sync

Because cameras with focal plane shutters use two curtains, there is a limit to the shutter speed you can use with traditional flash. This is because the rear curtain begins to close soon after the front curtain has finished opening. At higher shutter speeds, both curtains move simultaneously, forming a "slit" that moves across the film plane. In this case, standard X-sync flash will not work.

Focal plane high-speed sync, or FP-sync, fires the flash repeatedly as that "slit" moves across the film plane, which allows light from the flash head to expose the entire surface area of the negative evenly.

X Sync

description


Types of Flash Sync Connections

PC Terminal

A Prontor-Compur, or PC, terminal is the standard method for connecting a flash head to a camera. When the flash sync is triggered, a signal is sent from the camera along a wire to the flash telling it to fire.

Hot Shoe

description


Shutter Curtain

Most focal plane shutters are composed of two curtains: a front and a rear curtain. The front curtain slides open to begin the exposure, and then the rear curtain slides closed in the same direction to close the shutter.

Front Curtain Sync

Generally, the flash sync fires at the moment when the front curtain is at the beginning of its peak opening. This is called front curtain sync, and it is used to freeze motion at the beginning of the exposure. Front curtain sync is adequate for most flash-photography. When making long exposures while firing a flash, front curtain sync creates an effect where the motion blur appears to leave the subject behind.

Rear Curtain Sync

Some cameras offer the ability to fire the flash sync when the shutter is at the end of its peak opening. This is called rear curtain sync, and it is used to freeze motion at the end of the exposure. When making long exposures while firing a flash, rear curtain sync creates the effect of motion blur leading up to the subject.


Links


Glossary Terms