Difference between revisions of "Dr Miethe's Dreifarben-Kamera"

From Camera-wiki.org
Jump to: navigation, search
m (Replaced cat (Three-color > Three-color cameras))
m (unstubbed)
Line 1: Line 1:
{{stub}}
 
 
'''Dr Miethe's Dreifarben-Kamera''' ('''Dr Miethe's Three-colour Camera''') is a plate camera for colour-separation photography. It was designed by [[Dr. Adolf Miethe|Dr Adolf Miethe]] and made by [[Bermpohl]] of Berlin, in about 1902. Three successive exposures are made onto monochrome plates, through red, green and blue filters, to make component negative images for colour printing. The camera differs little from a normal folding plate camera, except for the provision of the filters, and a repeating back to accept dark slides holding three plates side by side, to facilitate making the three exposures with minimal delay.
 
'''Dr Miethe's Dreifarben-Kamera''' ('''Dr Miethe's Three-colour Camera''') is a plate camera for colour-separation photography. It was designed by [[Dr. Adolf Miethe|Dr Adolf Miethe]] and made by [[Bermpohl]] of Berlin, in about 1902. Three successive exposures are made onto monochrome plates, through red, green and blue filters, to make component negative images for colour printing. The camera differs little from a normal folding plate camera, except for the provision of the filters, and a repeating back to accept dark slides holding three plates side by side, to facilitate making the three exposures with minimal delay.
  

Revision as of 08:57, 10 September 2012

Dr Miethe's Dreifarben-Kamera (Dr Miethe's Three-colour Camera) is a plate camera for colour-separation photography. It was designed by Dr Adolf Miethe and made by Bermpohl of Berlin, in about 1902. Three successive exposures are made onto monochrome plates, through red, green and blue filters, to make component negative images for colour printing. The camera differs little from a normal folding plate camera, except for the provision of the filters, and a repeating back to accept dark slides holding three plates side by side, to facilitate making the three exposures with minimal delay.

The camera is wooden-bodied (mahogany) with brass fittings. It has rack-and-pinion focusing on the bed. It was made in at least two sizes:

  • 7.5x8.5 cm plates[1] The example cited is shown with the repeating back arranged vertically (the larger example below is shown with the back horizontal); it is not clear whether the repeating back can be rotated, though this would clearly be desirable. There does not appear to be a shutter; presumably a roller shutter could be mounted in front of the lens.
  • 13x18 cm plates[2] This camera has a green cloth bellows with leather (or leatherette) reinforced corners.


Notes

  1. 7.5x8.5 cm Dr Miethe's camera with 'Dr Miethe's Teleobjective' made by Schulze and Bartels, and red leather bellows. sold at the November 2008 Westlicht Photographica Auction in Vienna.
  2. 13x18 cm Dr Miethe's camera with Rodenstock 18 cm f/6.8 Doppelanastigmat Eurynar and dial-set Compur shutter, tele-converter, repeating back and dark-slides, sold at the May 2011 Westlicht Photographica Auction in Vienna.